IDH06G65C6XKSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDH06G65C6XKSA1 is part of the diode family and falls under the category of Rectifiers-Single. This device is a ultra-fast high blocking monolithic single phase silicon bridge rectifier and is typically used for rectification purposes.

A bridge rectifier circuit consists of four diodes connected in a bridge circuit configuration. The diode bridge is mainly used to convert Alternating Current to Direct Current. A diode bridge rectifier can also perform signal rectification in applications such as a power conditioners, signal rectifiers and signal processors.

The IDH06G65C6XKSA1 has multiple features that make it ideal for rectification purposes. It has a very low forward voltage drop across the junction, which increases the efficiency of the rectifier circuit. It also has very low reverse leakage current, which can reduce the amount of power wasted in the circuit. Its reverse current handling is good, making it suitable for applications with higher load current. Finally, it has a very low capacitance, which can minimize the amount of distortion of the signal during rectification.

The IDH06G65C6XKSA1 is a single-phase bridge rectifier, which means that it is composed of two series-connected diodes with one of the anode pins connected to the circuit neutral. This allows the circuit to be connected to a power source with one polarity and then used to rectify an alternating signal with the other polarity. The IDH06G65C6XKSA1 is also rated for high operating temperature, making it particularly suitable for high power applications where the circuit is likely to get very hot.

The IDH06G65C6XKSA1 can be used in a wide variety of applications, such as industrial power supplies, signal processing, automotive safety systems, home appliances, and any other applications that require rectification of alternating current signals. It is also used in DC-DC converters, power inverters, and other similar devices. It is also used in portable applications where size and weight are important considerations.

The working principle of the IDH06G65C6XKSA1 is relatively straightforward. It uses two series-connected diodes with one anode connected to the circuit’s neutral, and one anode connected to the main power source. When AC current passes through the circuit, the diodes will allow current to pass in one direction and block current from passing in the opposite direction. This rectifies the AC waveform into a DC waveform, which can then be used by other components in the circuit.

In summary, the IDH06G65C6XKSA1 is an ultra-fast, high blocking monolithic single phase silicon bridge rectifier. It has a low forward voltage drop, low reverse leakage current, low capacitance, and is rated for high operating temperature. It can be used in a wide range of applications such as power supplies and signal processing, as well as DC-DC converters and inverters. The device works by using two series-connected diodes to rectify an alternating current waveform into a direct current waveform.

The specific data is subject to PDF, and the above content is for reference