IDH10G65C5XKSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A diode is a two-terminal electronic component that consists of a semiconductor material, such as silicon, in between two electrodes (an anode and a cathode). In its most common form, the diode is only able to conduct a current in one direction, from the anode to the cathode. This unidirectional current flow is the basis of many electronic applications known as rectification. As such, a rectifier is any device used to convert an alternating current (AC) waveform into a direct current (DC) waveform. Single-phase rectifiers are the most widely used rectifiers and are often used in power supplies.

The IDH10G65C5XKSA1 is a member of the family of diodes known as rectifiers. It is a single-phase, full-wave rectifying diode bridge that incorporates four individual diodes specifically designed to convert alternating current (AC) waveforms into direct current (DC) waveforms. The device is designed for an operating voltage of up to 400 volts and a maximum forward voltage drop of 1.7 volts when carrying a current of 1.0 amperes. The IDH10G65C5XKSA1 is rated for continuous operation at temperatures up to 110°C and is available in a TO-247 package.

The IDH10G65C5XKSA1 is well-suited for use in a broad range of applications. It is commonly used in AC-to-DC converters, inverters, motor drives, UPS systems and solar power inverters. In addition, the IDH10G65C5XKSA1 may be used in low-voltage high-frequency rectifiers. The device is capable of withstanding high surge currents for line-commutated converters and high frequency inverters.

The working principle of the IDH10G65C5XKSA1 is based on the diode\'s ability to permit a current to flow in one direction only. When the AC waveform is applied to two of the diodes in the device, a voltage is generated on the two other diodes, both of which are equal but opposite in polarity. This allows the current to flow through just the two active diodes, which results in the conversion of the AC waveform into a DC waveform. In the case of the IDH10G65C5XKSA1, this conversion is done in a full-wave rectifying fashion, meaning that the full AC waveform is converted rather than just a half wave.

Overall, the IDH10G65C5XKSA1 is a versatile, single-phase full-wave rectifier diode bridge. It is well-suited for use in a wide range of applications, including AC-to-DC converters, inverters, motor drives, UPS systems and solar power inverters. The IDH10G65C5XKSA1 is designed for operating voltages of up to 400 volts, with a maximum forward voltage drop of 1.7 volts when carrying a current of 1.0 amperes. The device is rated for continuous operation at temperatures up to 110°C, and it is available in a TO-247 package.

The specific data is subject to PDF, and the above content is for reference