IDT74FCT823ATSOG8 Integrated Circuits (ICs)

Trigger Type:	Positive Edge
Base Part Number:	74FCT823
Package / Case:	24-SOIC (0.295", 7.50mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Input Capacitance:	6pF
Current - Quiescent (Iq):	1mA
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Output High, Low:	15mA, 48mA
Series:	74FCT
Max Propagation Delay @ V, Max CL:	20ns @ 5V, 300pF
Number of Bits per Element:	9
Number of Elements:	1
Output Type:	Tri-State, Non-Inverted
Type:	D-Type
Function:	Master Reset
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip Flops: The IDT74FCT823ATSOG8 is a high speed, low power, advanced low voltage Schottky integrated circuit. It is an octal buffer/line driver with 3-State outputs with high-voltage open-drain outputs, which can function as a bus-oriented transmitter or receiver. It can be used in applications such as PCIe, CAN, SFI-4, SMPTE, GbE, and UHS-III. This device is designed to meet the rapid growth in data communication system requirements.The IDT74FCT823ATSOG8 is a tri-state logic flip-flop, which is a component that can store a logic level (low or high) in the form of a voltage. It consists of two cross-coupled inverters and an output. A single flip-flop’s outputs can either be in the high or low state, and the inputs determine which one that is. It consists of two inputs, aEnable and Data, which can be used to set or reset the output as desired.A typical flip-flop application consists of a sequence of logic signals on a single line. The data is stored on the flip-flop when the Enable signal is asserted. The flip-flop is then reset by triggering the Reset input. The outputs of the flip-flop are then used to drive downstream logic devices. In the IDT74FCT823ATSOG8, the Enable and Data inputs are inverted before being sent to the output, allowing it to function in both positive and negative logic. This makes it extremely versatile and adaptable to numerous applications. The output can also be tri-stated, which means that the output can be completely disconnected from the logic circuit, allowing it to be used as a transmission line buffer. The main applications of the IDT74FCT823ATSOG8 are primarily related to interfaces where data is transferred at high speed across two electrical domains. Normally, high voltage and protocol translation is needed to interface between two distinct domains. Additionally, the use of this device in high speed multi-processor systems can provide a high level of flexibility in terms of system expansion and fault-tolerance. The IDT74FCT823ATSOG8 is designed to meet the stringent requirements of the automotive and industrial markets, where reliable operation is essential. It has been tested for use in temperatures of up to 125°C and voltage ranges of up to 3.3V. It is also fully compliant with the industry standard IO-Link protocol. In conclusion, the IDT74FCT823ATSOG8 is an advanced tri-state flip-flop device capable of providing high performance, low power solutions for a variety of data transfer applications. With its versatile inputs and reliable operation, the IDT74FCT823ATSOG8 can provide a dependable solution for many different types of digital systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description