IDTADC1006S055H-C1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADC) are devices used to convert analog signals into digital signals. IDTADC1006S055H-C1 is one such ADC. It has 6-bit resolution and operates at a frequency of 30MHz.

It has a wide application field; from medical instruments to telecommunications, avionics, and consumer electronics. In medical instruments, it is used to convert electrical signals from medical detectors such as ultrasonic scanners or ECG machines into digital signals which are sent to computers for further processing. In telecommunications, it is used to convert analog signals from telephonic conversations or satellite broadcasts into digital signals for easier routing.

The working principle of IDTADC1006S055H-C1 involves using a capacitor array and charge splitting technique to convert analog signals into digital signals. The capacitor array contains 6 capacitors, and each capacitor corresponds to one bit in the final digital output. The analog signal is applied to the capacitor array and then each bit is sampled in turn, either 0V or 5V, depending on the analog level. The sampled values are then passed to the charge splitting technique and shifted until all 6 bits of the digital output are formed.

The charge splitting technique is used to generate a reference voltage which is used to compare the analog input voltage to determine the digital output value. This reference voltage difference between successive bits is created by splitting the charge from the input voltage, and then dividing it between the capacitors. This division means that the reference voltage for each successive bit is decreased, until ultimately all 6 bits are formed.

The IDTADC1006S055H-C1 analog to digital converter has a high sampling rate of 30MHz and a wide application field, from medical instruments to telecommunications. Its working principle involves using a capacitor array to sample the analog signal, and a charge splitting technique to generate the reference voltage for the comparison which forms the digital output.

The specific data is subject to PDF, and the above content is for reference