IDTADC1210S065HN-C1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC)Analog-to-Digital Converters (ADCs) have become the cornerstone of data acquisition. As digital systems become increasingly more sophisticated, the need for reliable, fast and accurate data acquisition systems has led to the development of a wide variety of ADCs over the years. The IDT ADC1210S065HN-C1 is a highly integrated, low power, 6-bit Level-2 Mixed-Signal Converter (MSC) designed to convert analog signals into digital data. This article will focus on the application field and working principle of the IDT ADC1210S065HN-C1.The IDT ADC1210S065HN-C1 is a low power, CMOS-based MSC with a single-ended input and a differential output. The differential output enables more than one signal to be sampled at the same time. It is also configured for 6 bits of resolution, with a maximum sample rate of 1.8MSPS (Mega-Samples per Second).The on-chip ADC eases component selection and reduces cost, enabling designers to develop systems easily and rapidly. It can be used in a variety of applications, such as audio signal processing, instrumentation, medical imaging, automotive and industrial automation.The ADC1210S065HN-C1 features a wide operating temperature range of -40°C to +85°C, as well as an enhanced signal-to-noise ratio (SNR). It is also capable of providing an accurate signal representation by having scaled voltage at full-scale and gain variation of ±2%. Additionally, the device is designed with an on-chip reference output buffer and sample-and-hold circuitry that are adjustable to provide high accuracy and allow for minimal crosstalk.The ADC1210S065HN-C1 has a four-channel input that allows for concurrent conversion of multiple analog signals at different sample points with minimal crosstalk. A range of input-level reference voltages is also available, allowing designers to scale the voltage range of the Analog-to-Digital conversion. When the reference voltage is set at the full-scale range, a differential output of 10mV is provided, which ensures an accurate representation of the input signals.To enable the conversion process, the IDT ADC1210S065HN-C1 utilizes an dual-sample-and-hold (DS&H) integrated circuit. This DS&H is designed to capture, store and compare the analog signals in order to convert them into digital data. The DS&H is located between the input and output stages of the device and allows for simultaneous sampling of two signals at different sample points.The analog data is sampled according to a sequential pattern, with each sample point being shifted slightly from the previous sample point. This shift is necessary to ensure that the selected sample point is insensitive to any noise that could be present in the analog signal.The IDT ADC1210S065HN-C1 utilizes a dual-sample-and-hold architecture and 6-bit circuit design to ensure accurate representation of analog signals. In addition, the device has several time-delay and tracking components that allow for fast and precise feedback loop control. This allows the device to minimize errors due to errors in sampling or in tracking of analog signals.In conclusion, it is evident that the IDT ADC1210S065HN-C1 is a powerful and reliable tool for converting analog signals into digital data. With its wide temperature range, enhanced SNR, adjustable reference output buffers, and automated sampling pattern, the device is well-suited for a variety of applications. Additionally, it is able to provide accurate representation of analog signals with minimal errors due to noise. As such, the IDT ADC1210S065HN-C1 is an ideal choice for engineers looking for an affordable and reliable solution for data acquisition.

The specific data is subject to PDF, and the above content is for reference