IDTADC1206S040H-C18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog-to-digital converters (ADCs) are devices that take an analog signal, such as voltage or current, and convert it into a digital signal, usually in the form of binary numbers. The IDTADC1206S040H-C18 is a precision 16-bit, wide-temperature ADC that is well suited for industrial, medical, and consumer applications. This article will discuss the application field and working principle of the IDTADC1206S040H-C18.

Application Field

The IDTADC1206S040H-C18is an ideal option for use in industrial, consumer and medical applications, such as calibration and test equipment, automotive, factory automation, medical imaging equipment and medical device design. The ADC provides quality medical imagining results, including improved detection and diagnostics, improved signal-to-noise ratio, and increased accuracy. The ADC also supports a wide range of temperature conditions, including extended temperature operating range from -40C to +85C. The device also integrates high-speed sample rate capability of up to 40MS/s and low power consumption of 1.7mW/MHz.

Working Principle

The working principle of an ADC is to convert an analog signal into a digital signal. This is done by taking a continuous voltage signal, and turning it into discrete values (numbers). In practice, the device achieves this by using multiple capacitors and resistors. The ADC has a known reference voltage, which a selector switch is used to compare the input voltage to. When the reference voltage is higher than the input voltage, a switch is activated and the value of the current capacitor is increased, until the input voltage is greater than the reference voltage.

Once the voltage of the input signal is greater than the reference voltage, the current capacitor value is stored, and the input signal is compared to the new reference voltage. This operation continues until the last capacitor, whose value is then computed as the digital output. In the IDTADC1206S040H-C18, the resolution of the ADC is 16-bits, meaning that up to 2^16 (65536) values are encoded.

Conclusion

The IDTADC1206S040H-C18 is a 16-bit precision ADC that is used in a variety of medical, industrial, and consumer applications. The device is also well suited for high-speed applications, due to its fast sample rate of up to 40MS/s, and low power consumption of 1.7mW/MHz. In operation, the IDTADC1206S040H-C18 uses multiple capacitors and a known reference voltage. The input voltage is then compared until it is greater than the reference voltage, at which point the current capacitor value is stored and then used as the digital output.

The specific data is subject to PDF, and the above content is for reference