ILD610-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are components that transfer electrical signals between separate circuits through an optical interface. This process isolates the circuits electrically, creating a barrier to reduce power surges, facilitate data transfer, and block interference. A popular form of optoisolator is the ILD610-3 component, a high performance, four transistor output, photovoltaic device. This article will discuss the application field and working principles of the ILD610-3.

Application field and features

The ILD610-3 device is most widely used in multiple transistor production equipment, automated signal control circuits, and various test and measurement devices. It can also be used in high voltage environments, serving as a direct alternative to other optoisolators such as the 2N2222, 2N3904, and 2N3906.

The ILD610-3 is a four transistor output, photovoltaic optoisolator. It offers high-speed output compared to traditional transistor-controlled devices, with a response time of less than 15ns. Its optically isolated output can provide over 5kV of electrical isolation, and its insulation resistance can exceed 10MΩ. The ILD610-3 also offers enhanced environmental resistance due to its UL94-V0-rated flame retardant casing.

Working Principle

The ILD610-3 utilizes a photovoltaic process to transfer electrical signals across an optical barrier. On one side of the device, an AC signal is applied to an LED for conversion into light pulses. These light pulses are then focused in the opposite side of the optoisolator, and onto a photodiode. The photodiode then converts the light pulses back into an electrical signal. Due to the optical interface, the electrical signal is kept isolated from the input side. This forms a barrier against power surges, data transfer, and interference.

The ILD610-3 offers improved stability and fast response times by its individually controlled transistors. When a photodiode is exposed to light, there is an electrical current flow generated. This current is then amplified by the four individually controlled transistors. Each transistor is designed to respond to either the positive or negative portion of the waveform signal, providing faster output than with traditional transistor controlled devices.

Conclusion

The ILD610-3 is a high performance, four transistor output, photovoltaic optoisolator. This device offers improved environment resistance, enhanced insulation, and fast response times of 15ns or less. It is most widely used in multiple transistor production equipment and automated signal control circuits. The ILD610-3 utilizes a photovoltaic process to transfer electrical signals across an optical barrier, isolating the circuits electrically and forming a barrier to reduce power surges, facilitate data transfer, and block interference.

The specific data is subject to PDF, and the above content is for reference