ILD615-1X007T Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that provide electrical isolation between two electrical circuits while transferring signals through a light wave or optical link. The ILD615-1X007T is a transistor output, photovoltaic type optoisolator and this article will discuss its applications and working principle.

The ILD615-1X007T is a 6 pin SOP optoisolator with transistor output. It has a very low input current of just 0.1mA and a low output saturation voltage of 0.35V across a wide operating temperature range of -40C to +85C. It has a wide common mode transient immunity of 2000Vrms and a wide voltage range of 3 to 25V making the device suitable for use in many areas. It has a low pulse width distortion of 250ns and a high switching speed of 100kHz.

The ILD615-1X007T is mainly used in industrial applications for signal isolation, signal transmission and switching applications. These include analog signal conditioning, digital signal conditioning, low voltage control, signal switching and protection. It is well suited for use with data communication systems, high voltage power supplies, motor control systems, and machine learning systems. The optoisolator can also be used in safety applications for isolating sensing inputs from dangerous conditions.

The optoisolator’s working principle is based on optical isolation. It has an input diode that is energized with low current and generates light, which is converted into a high current output by a photovoltaic cell with an accompanying Darlington transistor. The input diode is biased to a steady state, and the output transistor is held in a stable, off-state, unless the optoisolator is energized. The output Darlington transistor is then switched on and a low voltage pulses is generated that is proportional to the input diode’s photo current. The output transistor is then switched off again when the input current is removed. This allows signals to be transmitted through the optoisolator without the transfer of electrical noise between circuits. In addition, the optoisolator’s insulation also prevents electrical shocks.

In conclusion, the ILD615-1X007T optoisolator is a 6 pin SOP device with low input and output currents, and high switching speed. It has a wide operating temperature range, and wide common mode transient immunity. It is mainly used in industrial signal conditioning, signal switching, and protection applications. It works by optically isolating signals between two circuits with the help of an input diode and a photovoltaic cell with an output transistor. This allows for signal transmission without the transfer of electrical noise and electrical shocks.

The specific data is subject to PDF, and the above content is for reference