IR3101 Allicdata Electronics
Allicdata Part #:

IR3101-ND

Manufacturer Part#:

IR3101

Price: $ 0.00
Product Category:

Integrated Circuits (ICs)

Manufacturer: Infineon Technologies
Short Description: IC POWER MODULE 1.6A 500V 11-SIP
More Detail: Half-Bridge Gate Driver IC Non-Inverting 11-SIP
DataSheet: IR3101 datasheetIR3101 Datasheet/PDF
Quantity: 1000
Stock 1000Can Ship Immediately
Specifications
Current - Peak Output (Source, Sink): --
Base Part Number: IR3101
Supplier Device Package: 11-SIP
Package / Case: 11-SIP, 9 Leads
Mounting Type: Through Hole
Operating Temperature: -40°C ~ 150°C (TJ)
Rise / Fall Time (Typ): --
High Side Voltage - Max (Bootstrap): 500V
Input Type: Non-Inverting
Series: iMOTION™
Logic Voltage - VIL, VIH: 0.8V, 2.9V
Voltage - Supply: 10 V ~ 20 V
Gate Type: N-Channel MOSFET
Number of Drivers: 2
Channel Type: Independent
Driven Configuration: Half-Bridge
Part Status: Obsolete
Packaging: Tube 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Management Integrated Circuits (PMICs) refer to an integrated circuit that provides all the required power to a device\'s subsystems or entire system. Gate Drivers are PMICs that are used to drive a gate of a power switch such as a field effect transistor (FET). They provide the necessary voltage, current, and timing signals to switch the power FETs on and off. Gate Drivers can also be used for dimming, switching, and regulating power to loads. IR3101 is a 3A Gate Driver, a PMIC from Infineon Technologies, designed to provide the fastest, most reliable switching behavior for devices that require minimal inductive and capacitive load losses.

The IR3101 is suitable for DC-DC converters, synchronous rectification, load switch applications, and more. It is a compact, high-efficiency integrated circuit that can deliver up to 3A of continuous current with fast switching speed. The device has built-in advanced features to improve performance. It can operate up to 1.5MHz switching frequency while allowing 3A continuous current with low RDS(ON) and high efficiency. Its built-in true RMS current sensing circuit allows users to monitor and set the current output more accurately.

The IR3101 is designed for minimal component count. It has the advantages of low resistive loss, low component count and lower board area. It is designed to provide the optimal design flexibility, allowing customers to pick and choose from a variety of component configurations. In addition, the device has inbuilt protections such as under-voltage lockout, short circuit, overload and thermal protection.

The IR3101 is designed to operate with a single voltage power supply ranging from 2.4V to 5.5V. This allows for higher efficiency in applications such as DC-DC converters, where a high voltage source is used. It has built-in logic circuitry that allows for easy interfacing between logic and the power FET. An internal startup circuit allows the device to power up even when the input voltage is not available yet.

The IR3101 works by providing an output voltage that is adjustable from 0V to 10V. This voltage is used to drive the gate of the power FET, switching the FET on and off. The device has inbuilt logic that allows for easy synchronization between two or more devices, allowing for parallel or cascaded applications. The device also has a built-in current sensing circuitry that allows users to monitor the current output and react accordingly.

The IR3101 is an ideal solution for any design requiring power switches such as load switches, DC-DC converters, and synchronous rectifiers. It is an efficient, compact, and reliable solution to the design challenges presented by these applications. The device has a built-in true RMS current sensing circuit and advanced features such as protection circuits, allowing users to achieve the best results with minimal effort.

The IR3101 is an ideal solution for designers looking for an efficient and reliable solution for their power switch applications. It is a compact, high-efficiency integrated circuit solution that can deliver up to 3 A of continuous current with fast switching speed. Thanks to its advanced features such as synchronization, protection, and current sensing, the IR3101 is the perfect choice for a variety of demanding applications.

The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "IR31" Included word is 3
Part Number Manufacturer Price Quantity Description
IR3103 Infineon Tec... 0.0 $ 1000 PWR MOD 180W GATE DRIVER ...
IR3101 Infineon Tec... -- 1000 IC POWER MODULE 1.6A 500V...
IR3104-MK4/A TE Connectiv... 2.08 $ 1000 IR3104-MK4/AInfrared Heat...
Latest Products
MAX5055AASA

IC MOSFET DRVR DUAL 8-SOICLow-Side Gate ...

MAX5055AASA Allicdata Electronics
LM27222SD

IC MOSFET DVR SYNC 4.5A HS 8WSONHalf-Bri...

LM27222SD Allicdata Electronics
ISL89166FBEAZ-T

IC MOSFET DRIVER 2CH 6A 8SOICLow-Side Ga...

ISL89166FBEAZ-T Allicdata Electronics
ISL6614CBZR5238

IC DRVR DUAL SYNC BUCK 14-SOICHalf-Bridg...

ISL6614CBZR5238 Allicdata Electronics
LM5111-3MYX/NOPB

IC MOSFET DRIVER DUAL 5A 8MSOPLow-Side G...

LM5111-3MYX/NOPB Allicdata Electronics
IXDN414YI

IC DRIVER MOSF/IGBT 14A 5-TO-263Low-Side...

IXDN414YI Allicdata Electronics