IRD3CH31DF6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IRD3CH31DF6 is a diode rectifier that belongs to the family of single rectifiers. It has a wide range of application fields with a wide variety of working principles. The IRD3CH31DF6 rectifier is used in electronic applications that require rectification, usually in the form of converting alternating current (AC) to direct current (DC). This rectifier has been designed to provide efficiency and excellent performance when used in AC- and/or DC-to-DC applications such as power factor correction, voltage regulation, and soft start circuits.

In AC power applications, the IRD3CH31DF6 features a non-discontinuous current and a higher reverse voltage capability in comparison to most other rectifiers. The components of the IRD3CH31DF6 consist of four independent three-phase branches of rectifiers, each featuring two Schottky diodes with anode-cathode voltage ratings up to 800V. The Schottky diodes that form each branch also feature a wide range of reverse voltage up to 150V, allowing the rectifier to be used in applications that require a high reverse voltage.

One of the main advantages of the IRD3CH31DF6 rectifier is its full-wave bridge rectifier topology. This configuration allows the device to easily and efficiently convert AC power to DC power, by splitting the incoming AC signal into both positive and negative half-cycles. Then, the two half cycles are rectified into DC power. This full-wave bridge rectifier topology also reduces the AC spike effect, by allowing the rectified DC signal to be filtered by a capacitor.

The IRD3CH31DF6 also features integrated field effect transistors (FETs) which allow for better efficiency and a lower operating temperature. Additionally, these integrated FETs also reduce losses by providing an additional layer of protection against feedback current, while reducing the amount of current stored in the switching loop.

The IRD3CH31DF6 is also suitable for use as a step-down transformer and provides a wide variety of output voltages. This is done by using two switches in parallel to control the power output of the rectifier. This allows the IRD3CH31DF6 to be used in areas where the power supply needs to be stepped down from one level to another.

The IRD3CH31DF6 is an excellent choice for a wide range of AC power applications. Its full-wave bridge rectifier topology, combined with its integrated FETs, make it a reliable and efficient choice for power applications such as power factor correction and voltage regulation. Additionally, its ability to provide output voltages for step-down applications make it an ideal choice for a wide variety of electronic power needs.

The specific data is subject to PDF, and the above content is for reference