IRKH56/04A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, also known as silicon controlled rectifiers (SCRs) are three terminal solid state devices which act as a switch in electronic circuits. Each thyristor consists of a gate terminal, an anode terminal, and a cathode terminal. When a certain voltage is applied at the gate terminal of a thyristor, it enables the flow of current passing between the anode and cathode without any further external gate control. Therefore, the thyristors are extensively used to control the flow of high current with low power signals.

IRKH56/04A is a basic thyristor module designed for low-voltage applications such as industrial drive circuits, motor control circuits, and power supplies. It is composed of two SCR components and a heat sink, featuring a minimum breakdown voltage of 600V and a maximum forward current of 64A.

IRKH56/04A thyristor modules are based on a hybrid intrablock. On this module, two SCRs are connected in series inside a ceramic case mounted on a copper heat sink. The copper heat sink ensures that the heat generated within the module is dissipated effectively and the SCRs will not be damaged due to the heat generated during operation. Moreover, the hybrid intrablock design of this module increases the breakdown voltage and therefore allows it to switch higher current applications compared to a regular single SCR module.

IRKH56/04A thyristor module is used primarily in motor control circuits, where it is used as a switch to control the flow of current. When the gate terminal of this module is given a gate trigger, the anode and cathode of the module become conducting, allowing current to flow. The module then remains conducting until the anode to cathode voltage drops below a certain level.

This module is also used in power factor correction and power supplies, in which it is used to regulate the voltage. In power factor correction circuits, the IRKH56/04A module is used to switch the capacitor in and out of the circuit and enable or disable the flow of current. In power supplies, the module is used to control and adjust the input voltage for a stabilizing output voltage.

In a nutshell, the IRKH56/04A thyristor module is an important and versatile device used in many different applications including motor control, power factor correction, and power supplies. The module is composed of two SCRs, a ceramic case, and a copper heat sink, enabling it to switch higher currents sources. Its key features include a minimum breakdown voltage of 600V and a maximum forward current of 64A.

The specific data is subject to PDF, and the above content is for reference