IRS2336DMTRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IRS2336DMTRPBF is a driver for insulated gate bipolar transistors (IGBTs). It is a member of the Integrated Power Solution (IPS) from Infineon Technologies AG and is part of the PMIC - Gate Drivers family.

The device improves switching performance and reduction of losses in medium voltage topologies, such as full-bridge, half-bridge and buck-boost converter. It is rated for operation up to + 650V DC, its wide input common-mode range can handle input voltages up to + 600V DC.

IGBT is a bipolar power device with a gate terminal isolated by an oxide MNOS gate. Its voltage resistance may be very high, so the gate needs a reinforced current supply in order to switch it on. The IRS2336DMTRPBF is designed to provide these high voltages, currents and rates needed to control these large switching elements. The device combines advanced controlled temperature gate drivers, with the latest power module technology providing small form factor and high reliability.

Working principle

The IRS2336DMTRPBF works through its two current paths, the low side and high side. The low side provides a reference voltage between the source and gate of the low side IGBT, while the high side provides a reference voltage between the drain and gate of the high-side IGBT. Both transistors are enabled through the on/off control signal. In addition, the IRS2336DMTRPBF provides a sequence of the currents applied to the high and low side during the normally off-state condition to prevent the conductive arc.

The device can switch frequencies up to 25 kHz and provides a driving power capability of up to 15A. It features a built-in over-temperature and under-voltage protection to protect the IGBT from high temperature or inadvertent voltage drop. It also provides an over-current protection to protect the IGBT from an overcurrent condition. Additionally, the driver includes soft switching to reduce switching losses and to provide maximum efficiency.

Application field

The IRS2336DMTRPBF is primarily used in applications such as motor drive, welding and solar energy systems, and switch mode power supplies. The device is capable of switching voltages up to 650V DC, and the built-in current sensing allows the user to monitor the performance of the IGBT and detect any failures in the system. In addition, the over-current protection allows the user to detect any short circuits or overloads in the system and switch off the IGBT. In addition, the device can be used in medium voltage AC motor drive systems, resonant converter circuits and motor soft start applications.

The IRS2336DMTRPBF is an ideal solution for applications that require high voltage and high current switching of IGBT gates. Its wide range of features, wide input common-mode range and built-in protections make it an ideal choice for medium voltage applications and enable the user to maximize efficiency and reliability.

The specific data is subject to PDF, and the above content is for reference