IS45S32800D-6BLA1-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IS45S32800D-6BLA1-TR, a Synchronous FIFO device is a type of memory usually employed to buffer data between two data transfer devices operating at different speeds or with different latency. As the name suggests, Synchronous FIFO devices are designed to provide synchronous operation, allowing data to flow between two devices in an orderly synchronized fashion. FIFO, or first in, first out, is a concept where the data that is written into the device first is also read out of the device first. Thus, FIFO devices are used for time-sharing of data, through a common bus.

IS45S32800D-6BLA1-TR device is a high-speed synchronous FIFO device that is specially designed for use in communications and networking applications. It consists of two memory ports, an input port and an output port, which allows data to be buffered between the two ports. The data is stored in a series of 8-bit wide RAM locations, which are organized into a 18 deep, four-word-wide, one-byte-wide memory array. The device also contains three 4-bit wide address registers, one for each port, which are used to keep track of the location of the next data (read/write) to be stored/retrieved in the device.

The device can be configured to operate in two modes, namely in-order and out-of-order mode. In-order mode is used when the data is being accessed using a single clock domain and data read from the device is always in the same order as it was written into the device. In out-of-order mode, the device can be used when the data is being accessed using two separate clock domains and data written into the device may not always be read back in the same order as it was written. The device can also be configured to operate in a variable latency mode where the latency of each read or write operation can vary depending on the application needs.

The Device is available in two package options, a 44-pin LQFP (6x6mm) and a 64-pin QFQ (10x10mm) package. The device has an operating voltage range of 2.7 volts to 3.6 volts and an operating temperature range of –40°C to +105°C. The device has an asynchronous reset pin, two chip select pins and it can be used in 2.5V and 3.3V system environments. The device has power-down logic which can be used to disable the device and put it into a low-power state if desired.

The IS45S32800D-6BLA1-TR is an advanced synchronous FIFO device that can be used to buffer and share data between two devices operating at different speeds or with different latency. Its small size and low-power usage make it a good choice for use in communications and networking applications where space and power requirements are an issue. The device can be used in a variety of modes to fit different application needs and its wide operating temperature range make it suitable for use in harsh environment applications such as automotive or aerospace.

The specific data is subject to PDF, and the above content is for reference