ISO100CP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISO100CP is a type of linear amplifier. It is widely used for instrumentation, operational amplifiers (OP Amps), buffer amplifiers, and other applications. The ISO100CP can be used to boost signal levels to match different interfaces. It is a miniature device that is highly reliable and provides excellent noise suppression.

Introduction to ISO100CP

The ISO100CP is a high-performance, zero-drift linear amplifier for precision applications. It features a single-ended/balanced output, low quiescent power, low thermal residual noise and very low capacitance. The ISO100CP is a truly symmetric high-performance common-mode amplifier and is ideal for a variety of single-ended and differential-mode measurements. This model has an integrated cutoff frequency, typically between 10 MHz and 20 MHz.

Features of the ISO100CP

• High-performance, zero-drift linear amplifier
• Input voltage range of 0 V to 12 V
• Output current range of 0 mA to 18 mA
• Output voltage range from 0 V to 36 V
• Bandwidth of 10 MHz to 20 MHz
• High linearity (±0.1 %)
• High-input impedance of 1 GΩ
• High slew rate of 5 V/µs
• Output current range of 3 mA to 15 mA
• Low thermal residual noise

Applications of the ISO100CP

The ISO100CP is commonly used in instrumentation, operational amplifiers (OP Amps), buffer amplifiers and many other applications where amplifying a signal is required. It can be used to boost the signal levels to match different devices and interfaces, such as active filters and oscillators. With its low input noise, low power consumption and high linearity features, producers of audio equipment use the ISO100CP for pre-amplification. Additionally, the ISO100CP is used in active control networks, such as those used in robotic control, where high-accuracy control is required.

Working Principle of the ISO100CP

The ISO100CP is a differential amplifier and works in a very similar manner to a conventional amplifier. It operates on the principle of voltage gain, meaning it increases the voltage (or current) of a given signal. The input voltage is applied to the two inputs of the amplifier, the inverting and non-inverting inputs, and the amplified output is taken from the output terminal. The output signal of the amplifier is dependent on the ratio of the in-phase voltage gain and the out of phase voltage gain, also known as the common-mode gain.

The ISO100CP also has a feature called offset adjustment, which can be used to adjust the gain of the output signal and compensate for any non-linearities in the amplifier. This feature makes the ISO100CP ideal for applications that require precision and consistency.

Advantages of the ISO100CP

The ISO100CP offers a number of advantages over other types of amplifiers. It is a compact, miniature device that is highly reliable and requires very little power to operate. It also has a high-input impedance of 1 GΩ, which makes it ideal for applications where signal sampling is required. Additionally, the ISO100CP has excellent noise suppression, meaning signal distortion is minimized.

Conclusion

The ISO100CP is an excellent choice for instrumentation, operational amplifiers (OP Amps), buffer amplifiers and other applications where signal levels must be boosted. This linear amplifier is highly reliable, requires very little power to operate and offers excellent noise suppression. It is a miniature device with an integrated cutoff frequency and low capacitance. Additionally, this model features offset adjustment, which can be used to adjust the gain of the output signal to ensure superior performance.

The specific data is subject to PDF, and the above content is for reference