ISO113B

Voltage - Input Offset:	20mV
Base Part Number:	ISO113
Supplier Device Package:	16-CDIP
Package / Case:	24-CDIP (0.600", 15.24mm), 16 Leads
Mounting Type:	Through Hole
Operating Temperature:	-25°C ~ 85°C
Voltage - Supply, Single/Dual (±):	±10 V ~ 18 V
Current - Output / Channel:	15mA
Current - Supply:	90mA
Series:	--
-3db Bandwidth:	20kHz
Slew Rate:	1.5 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	Isolation
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISO113B Application Field and Working Principle

ISO113B is a monolithic integrated circuit (IC) amplifier specially designed for precision applications. It is classed as a linear amplifier, categorized under instrumentation amplifiers, operational amplifiers (op-amps), and buffers. It is used as an interface between transducers, measurement instruments, and systems. This IC helps in amplifying and translating a low-level signal into a large signal with a high degree of linearity over a wide range of input frequencies and input bias levels.The ISO113B provides high input impedance for accurate signal transmission and has low output impedance for sharper signal transition. It is designed for use in measuring circuits, medical equipment, and other precision applications. It can also be used to amplify extremely low-level signals from transducers and signal converters.ISO113B has high linearity and wide signal range that makes it an ideal choice for applications where noise or signal disruption caused by external signals is of a primary concern. By combining the right SOT23 isolation package and IC, ISO113B can be used to drive analogue-to-digital converters.ISO113B is a kind of precision amplifier and is mainly used to amplify signals from transducers, measurement instruments and systems, with lower noise and signal disturbance. It also helps in amplifying, translating and filtering extremely low-level signals as well as high-frequency signals that are highly susceptible to noise. As the ISO113B has a wide range of input frequency and input bias, it is capable of amplifying signals within a wide range. Apart from this, it even has the capability to increase translational and filtering accuracy by providing direct driving data for analog to digital conversion.

Working Principle of ISO113B

ISO113B amplifier utilizes two integral operational amplifiers to provide a gain of up to 1000. It works on the principle of single-ended input, differential output. This means that one of the inputs of the amplifier is a “ground” reference or return point for both outputs of the two amplifiers. The two amplifiers are arranged such that one provides gain and the other provides offset compensation. The two outputs of the operational amplifiers are combined together to get a single output voltage. Input impedance is typically very high and this allows very high accuracy measurement even in case of low level signals.ISO113B utilizes the common-mode noise reduction system, where differential signals are attenuated by the factor to reduce the overall input noise and even the crosstalk between channels. This helps in reducing errors due to noise interference and thus allowing more accurate detection of signals. Another feature of ISO113B amplifier is that it provides low output impedance, which helps in providing sharper output transition slopes and better overall quality of signals.The ISO113B ICs are available in several package sizes, ranging from 2.0mm to 5.0mm, and hence it is considered to be a compact solution for applications where physical constraints are a consideration. The ISO113B IC can be used to provide gains of up to 1000 in applications where the signal needs to be amplified with low noise and low-bias levels.

Applications of ISO113B

Since ISO113B amplifier provides high input and low output impedance, it is apt for precision applications like medical instruments, measuring circuitry, detection systems and other industrial control applications. It is also used in equipment such as data transducers and other items that require low-level electrical signals. Apart from this, ISO113B can also be used to enhance the signals from multiple sensors that can measure physical phenomena such as pressure, temperature, and flow. In addition, it is also suitable for systems which include wireless technologies like Bluetooth and Wi-Fi. Some of the examples of applications include industrial test and control, automotive, fluid level measurement, and energy management. In the biomedical field, ISO113B can help in developing multiple medical instruments like blood glucose monitors, hearing aids, and thermometers. It is also suitable for providing data inputs to portable medical systems and tools. In general, ISO113B amplifier is an essential requirement in any sort of sensitive and precise systems. It helps in amplifying low-level signals in order to provide more details on data readings.The ISO113B IC is a powerful and reliable solution that provides the utmost precision and accuracy while dealing with sensitive signals. It is capable of amplifying low-level signals in a wide range and helps in providing clearer measurements than traditional amplifiers. It is used in many industrial and biomedical applications due to its advantages of low noise, high linearity and wide frequency response. ISO113B IC also helps in providing a driving direct into analog-to-digital converters, thus ensuring that the data will be accurately transmitted to the device, providing an accurate and high-fidelity output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description