ISO7821DW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital isolators provide galvanic isolation between two digital interfaces, transferring digital signals between them without com-promising system performance. The ISO 7821DW application field and working principle is a form of digital isolation used for data transfer over short distances, typically under 20 meters. It works by using an isolated DC-DC converter to transmit the signal through a thin-film magnetic field between the transmitter and receiver.

The ISO 7821DW application uses thin-film coils to couple the signals, which are magnetically insulated from each other. This type of data separator ensures signal integrity, even at the short distances that are typical in embedded systems or other circuit designs. It is an inter-leaved signal-transmission protocol that reduces the possibility of crosstalk and interference. Additionally, it provides a high level of noise immunity, which is important when transmitting over long distances.

To use the ISO 7821DW application, the user must first connect the transmitter to a data source. The source will typically be a microcontroller or other digital signalling device. The device will then send data across the transmission path to the receiver, which is typically another microcontroller or other digital signalling device. The transmitter and receiver are connected via a pathway in the form of one or more wires, coaxial cables, or even wireless technology, depending on the application.

At the heart of the ISO 7821DW application is a DC-DC converter, which is typically housed inside the isolator. This power converter takes in the DC signal at the input, which is then converted to an AC signal. This AC signal is then transmitted at the output of the converter, where it is coupled magnetically with the receiver. This process of isolated data transmission is called Galvanic Isolation.

The ISO 7821DW application works by transferring data across two independent channels. The isolation prevents any electrical interference caused by crosstalk or noise between the two devices. It also helps protect the device against any form of electrical damage from surges, ground loops, and other interference. This is done by eliminating the direct electrical connection between the two systems, allowing the signal to be transmitted across a physical separation, which reduces the risk of damage.

The data transmission between the two devices is typically done at a nominal rate of about 10 Mbps. This rate may vary depending on the type and size of the data being transmitted. In addition, the transfer rate also depends on the speed of the converter, which can be either asynchronous or synchronous, depending on the application.

Overall, the ISO 7821DW application provides an effective way to transfer digital signals between two separate systems, without compromising data integrity. It also offers a high level of noise immunity, which helps to reduce the risk of signal degradation or interference. Additionally, it uses magnetically insulated coils to transfer and receive data, which prevents crosstalk and interference between the two devices.

The specific data is subject to PDF, and the above content is for reference