ISP827X

Output Type:	Transistor
Supplier Device Package:	--
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-30°C ~ 100°C
Vce Saturation (Max):	200mV
Current - DC Forward (If) (Max):	50mA
Voltage - Forward (Vf) (Typ):	1.2V
Current - Output / Channel:	50mA
Voltage - Output (Max):	35V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	4µs, 3µs
Turn On / Turn Off Time (Typ):	--
Current Transfer Ratio (Max):	600% @ 5mA
Current Transfer Ratio (Min):	50% @ 5mA
Voltage - Isolation:	5300Vrms
Number of Channels:	2
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators are commonly used in electronic systems to keep systems isolated from each other with regards to the power or signal split between units. ISP827X is one type of such optoisolators which isolates an output and its corresponding input using a photovoltaic transistor output optoisolator. This article will provide an overview of the ISP827X application field and working principle.

Application Field

The ISP827X is an optoisolator that provides digital isolation between an input and an output. It is well-suited for applications that require the design to be galvanically isolated, such as in HVAC equipment, automotive, medical equipment, factory automation, and telecom. The ISP827X has an isolation rating of 2500VAC, which allows it to perform in high-voltage environments without the associated risk of electric shock. It can be used to connect two circuits and isolate their respective signals from each other. Additionally, it provides a pulse-width modulation (PWM) output that can be used to modulate the signal.

Working Principle

An optoisolator is broadly defined as an electronic device that isolates two circuits using optical or photonic technology. This information provides a detailed look at the working principle of the ISP827X. The ISP827X consists of a light emitting diode (LED), a photodetector, and a transistor. The LED is optically coupled to the photodetector, which in turn is connected to the transistor. When the LED is turned on, it emits a light, which is detected by the photodetector. The photodetector then triggers the transistor, thus allowing the signal to pass through the optoisolator. At the output side, the transistor acts as a switch. As current flows through the transistor, it blocks the voltage, thus keeping the output isolated from the input. ISP827X has a pulse-width modulation (PWM) output as well. This PWM output is important for certain applications, such as HVAC equipment. The PWM output allows the user to modulate the signal, thus allowing it to adjust the output voltage and current to the desired levels.

Conclusion

The ISP827X optoisolator is a versatile device that can be used in a variety of applications. Its 2500VAC rating provides excellent isolation in high voltage environments. The PWM output also allows the user to modulate the signal as needed. Overall, the ISP827X is an effective tool for providing insulation and signal isolation in digital systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description