Allicdata Part #: | J304FS-ND |
Manufacturer Part#: |
J304 |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | ON Semiconductor |
Short Description: | JFET N-CH 30V 15MA TO92 |
More Detail: | RF Mosfet N-Channel JFET TO-92-3 |
DataSheet: | J304 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Transistor Type: | N-Channel JFET |
Frequency: | -- |
Gain: | -- |
Current Rating: | 15mA |
Noise Figure: | -- |
Power - Output: | -- |
Voltage - Rated: | 30V |
Package / Case: | TO-226-3, TO-92-3 (TO-226AA) |
Supplier Device Package: | TO-92-3 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
J304 is a field-effect transistor (FET) used in RF applications. It is a unipolar device with a single source-drain path and a depletion-mode gate. As a unipolar device, the J304 can provide more power output from a given amplifier design when compared to a bipolar device.
The J304 also has other advantages over traditional FETs. J304 transistors have a higher switching speed than most transistors and are especially suited for use in RF switching applications. Additionally, the J304 has lower \off\ leakage current, making it more desirable than other FETs for low-noise amplifier applications. Finally, the J304 can be packaged in an inexpensive through-hole package, making it a cost-effective option for many applications.
When used in RF applications, the J304 works by creating an impedance transformation between a voltage source and a load. To create the transformation, a voltage is applied to the gate terminal of the FET, creating a conductive channel between the source and drain. The width of the conductive channel is determined by the applied voltage and is known as the channel length. By adjusting the applied voltage, the amount of current that passes through the channel can be controlled.
The working principle of a J304 FET transistor is generally the same regardless of application. A voltage is applied to the gate terminal, which, in turn, creates a conductive channel between the source and drain. This channel is known as the channel length and determines how much current is able to pass through the transistor. The amount of current passing through the channel is also affected by the voltage applied to the gate terminal.
The J304 can be used in many different types of RF applications. For example, they can be used as amplifiers and switch transistors in RF control systems, wireless systems, and mobile handsets. Additionally, they can be used as signal mixer transistors in signal generators, UHF oscillators, and low noise amplifiers. Finally, they can be used as drivers for power amplifiers in radar systems, radio receivers, and digital communications systems.
The J304 is a versatile and cost-effective transistor, providing reliable performance and long-lasting results when used in RF applications. By creating a conductive channel between the source and drain, the J304 allows for precise current control and makes it an ideal choice for use in many different types of applications. Thanks to its superior switching speed and low leakage current, the J304 is a popular option for use in RF-related applications.
The specific data is subject to PDF, and the above content is for reference
FET RF 68V 2.16GHZ NI-400RF Mosfet LDMOS...
FET RF 68V 1.99GHZ TO270-4RF Mosfet LDMO...
FET RF 40V 175MHZ TO272-6 WRAPRF Mosfet ...
FET RF 65V 2.17GHZ NI780SRF Mosfet LDMOS...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...