KDZTR6.2B Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components used in various technologies which can either allow or prevent electrical current from flowing, depending on the signal applied to the diode. The KDZTR6.2B is a single zener diode which functions in a similar manner as an ordinary diode, but with differences in its application field and working principle.

Application field

The KDZTR6.2B features a voltage regulation such that a voltage applied across it is maintained at a steady value, independent of the current flowing through it. The steady voltage value, Zener Breakdown Voltage, that it maintains is set by the manufacturer and is typically printed on the device.

Due to this particular characteristic of the diode, the KDZTR6.2B is used in several common applications, including voltage regulation, waveform clamping, reverse power protection and lightning surge protection.

Voltage regulation: The KDZTR6.2B is often used in circuits where an output voltage needs to remain at a steady value, no matter what the input voltage might be. The diode is connected in this case in an opposite fashion, allowing it to continuously adjust the output voltage to match the zener breakdown voltage, regardless of input voltage fluctuations.

Waveform Clamping: Waveform clamping is the act of limiting the voltage on a waveform so that it never exceeds beyond a certain point, thus preventing any damage to the device it is connected to. The KDZTR6.2B can be used for this purpose by connecting it in the same fashion as for voltage regulation.

Reverse Power Protection: The KDZTR6.2B is also used in our daily electrical apparatus functions to protect it from unexpected reverse polarity. This means that no matter what the polarity of the voltage applied, the device will not experience any damage.

Lightning Surge Protection: This characteristic of KDZTR6.2B makes it particularly suited for use in lightning surge protection as it can limit the magnitude of the voltage applied, should a lightning strike occur on the device. It can also provide benefits in terms of power leakage, allowing you to reduce the amount of leakage experienced when compared to an open circuit.

Working principle

The KDZTR6.2B is based on the working principle of a junction diode, which is essentially the basis of all semiconductor diodes. This type of diode consists of a p-n junction made up of two opposite-type semiconductor materials. When there is no voltage applied, the electrons and holes located on either sides of the diode remain in equilibrium, meaning that the current passing through this junction is equal to zero.

However, when a voltage is applied, the electrons and holes attain an equilibrium as soon as they have sufficient energy to cross the depletion region. This is known as the forward bias or forward conduction mode. This mode allows small current to flow through the junction with corresponding voltage. On the other hand, when a reverse bias is applied, the opposite occurs, blocking the current and not allowing it to flow through this junction.

Zener breakdown occurs when the resistance of the depletion region decreases to zero, causing a sudden influx of current to flow through. This increases the voltage at the diode terminal which appeared at the beginning of the breakdown process as the order to start the breakdown. This is how the KDZTR6.2B functions and why it can be used for various applications and protection.

It is important to note that the diode should be handled carefully and kept away from any moisture as it may lead to permanent damage. Additionally, the breakdown voltage should not be exceeded as it may cause a surge and permanently damage the device.

The KDZTR6.2B single zener diode is a low-cost solution to many of electrical and electronic problems. This diode can be used in applications such as voltage regulation, waveform clamping, reverse power protection and lightning surge protection. Its working principle based on junction diode enables it to effectively regulate current and voltage and protect the device from any unwanted voltages.

The specific data is subject to PDF, and the above content is for reference