Allicdata Part #: | KIT1925MMA6231Q-ND |
Manufacturer Part#: |
KIT1925MMA6231Q |
Price: | $ 0.00 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | NXP USA Inc |
Short Description: | KIT SENSOR ACCEL MMA6231Q |
More Detail: | MMA6231Q - Accelerometer, 2 Axis Sensor Evaluation... |
DataSheet: | KIT1925MMA6231Q Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Obsolete |
Sensor Type: | Accelerometer, 2 Axis |
Sensing Range: | ±10g |
Interface: | Analog |
Sensitivity: | 120mV/g |
Voltage - Supply: | 2.7 V ~ 3.6 V |
Embedded: | -- |
Supplied Contents: | Board(s) |
Utilized IC / Part: | MMA6231Q |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The KIT1925MMA6231Q is a low-voltage, 3-axis accelerometer module designed to measure acceleration, tilt, tap/double-tap, and shake events. It provides an easy-to-use solution for rapid prototyping of motion and vibration sensing applications. This module can be used in automotive safety applications, consumer electronics, industrial automation, and any other application where motion sensing is necessary. The KIT1925MMA6231Q contains a MEMS based 3-axis accelerometer and a signal conditioning circuit. The accelerometer uses a MEMS capacitive sensing technology to measure acceleration along three orthogonal axes. The sensitivity range of the accelerometer is ±2g, making it suitable for use in a wide range of applications.
The KIT1925MMA6231Q is powered by a 3.3V supply voltage, with a maximum supply voltage of 4.3V. The module has a standby current of 40µA, and an active current of 120µA. The module also has a range of features that include: selectable sensitivity range, programmable interrupt, detect shake event, wake up on motion detection, tap/double-tap detection, and freefall detection.
The KIT1925MMA6231Q accelerometer can be used to measure the motion of a body in three axes. The output signal from the accelerometer is a voltage that is proportional to the acceleration experienced by the body in those axes. The output voltage can be converted to acceleration values in g (gravity) by scaling it to the appropriate units.
The KIT1925MMA6231Q works in both I2C and SPI modes. In I2C mode, the module can communicate with a microcontroller or any other I2C-enabled device, allowing communication of acceleration data. In SPI mode, the module can be used to connect directly to an external processor or FPGA, providing the flexibility of measuring acceleration in software or hardware.
The KIT1925MMA6231Q accelerometer can be used in a variety of applications such as automotive safety, industrial automation, consumer electronics, wearables, and AR/VR applications. It is suitable for both consumer and industrial applications and can measure both linear acceleration and rotational motion. The KIT1925MMA6231Q offers accurate, reliable, and cost-effective motion sensing solutions for various applications.
In conclusion, the KIT1925MMA6231Q is an excellent motion sensor module for a variety of applications. Its low-voltage, high-sensitivity, and I2C/SPI compatibility make it an ideal solution for rapid prototyping. Its robust features such as automatic wake up on motion detection, tap/double-tap detection, and freefall detection make it an excellent choice for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
KIT16405 | Laird Techno... | 43.25 $ | 1000 | WHIP MC 1/2 137-149MHZ |
KIT1185-120 | Laird Techno... | 26.38 $ | 1000 | KIT ANT GPS 20FT |
KIT12XS6EVM | NXP USA Inc | 102.35 $ | 1000 | EVAL KIT MC12XS6 BULB DRI... |
DSC-TIMEFLASH2-KIT1 | Microchip Te... | 193.35 $ | 5 | TIMEFLASH OSCILLATOR PROG... |
KIT18 | Leader Tech ... | 26.17 $ | 12 | FABRIC SHIELDING GASKET E... |
EDU-KIT1 | Cornell Dubi... | 66.43 $ | 12 | CAPACITOR KIT FOR UNIVERS... |
MICA-KIT1F | Cornell Dubi... | 158.67 $ | 1000 | CAP KIT MICA 5PF-1000PF 2... |
AFC-KIT1 | Cornell Dubi... | 0.0 $ | 1000 | CAP KIT ALUM 0.1UF-470UF ... |
AFK-KIT1 | Cornell Dubi... | 0.0 $ | 1000 | CAP KIT ALUM 3.3UF-470UF ... |
AVS-F-KIT1 | Cornell Dubi... | 0.0 $ | 1000 | CAP KIT ALUM 0.1UF-1000UF... |
V-CHIP-KIT1 | Cornell Dubi... | 0.0 $ | 1000 | CAP KIT ALUM 10UF-1000UF ... |
FCA-KIT1 | Cornell Dubi... | 0.0 $ | 1000 | CAP KIT FILM 0.1UF-1UF 16... |
FCN-KIT1 | Cornell Dubi... | 0.0 $ | 1000 | CAP KIT FILM 0.068UF-0.47... |
FCP-KIT1 | Cornell Dubi... | 0.0 $ | 1000 | CAP KIT FILM 100PF-0.1UF ... |
ZICM357P2-KIT1-1 | CEL | 0.0 $ | 1000 | KIT DEVELOPMENT ENGINEER ... |
KIT1925MMA1250D | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA1250D... |
KIT1925MMA1260D | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA1260D... |
KIT1925MMA1270D | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA1270D... |
KIT1925MMA2260D | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA2260D... |
KIT1925MMA6231Q | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA6231Q... |
KIT1925MMA6233Q | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA6233Q... |
KIT1925MMA6260Q | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA6260Q... |
KIT1925MMA6261Q | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA6261Q... |
KIT1925MMA6262Q | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA6262Q... |
KIT1925MMA6263Q | NXP USA Inc | 0.0 $ | 1000 | KIT SENSOR ACCEL MMA6263Q... |
ENCL-KIT1 | 2.41 $ | 1000 | KEY FOB ABS BLK 0.67"L X ... | |
QB-KIT1-GRY | Panduit Corp | 365.67 $ | 1000 | QUICK-BUILD STARTER KIT, ... |
KIT1132-P250 | Laird Techno... | 27.51 $ | 1000 | ANTKIT,GB8+GRORF Antenna |
KIT1027 | Laird Techno... | 59.12 $ | 1000 | ANTKIT,FG821/18503+FM2SP,... |
MICA-KIT1 | Cornell Dubi... | 152.89 $ | 17 | CAP KIT MICA 5PF-1000PF 2... |
KIT1168-500 | Laird Techno... | 10.82 $ | 1000 | ANTKIT QWB900+ |
EK-HTSNK-KIT1 | Red Lion Con... | 0.0 $ | 1000 | NETWORKING KIT HEATSINK |
KIT1133-P250 | Laird Techno... | 25.71 $ | 96 | ANTKIT GB8W15FT CABLE |
QB-KIT1 | Panduit Corp | 491.25 $ | 5 | QUICK-BUILD STARTER KIT |
KIT1057-CP800 | Laird Techno... | 4.35 $ | 1000 | ANTKIT MUHFM-R58 |
AMB-50-KIT1 | Amprobe | 48.48 $ | 1000 | TEST LEAD SET FOR AMB-50 |
910FS-KIT1 | Greenlee Com... | 5.54 $ | 1000 | FUSION SPLICER & CLEAVER ... |
AMB-KIT1 | Amprobe | 207.87 $ | 1000 | TEST LEAD SET FOR INSUL R... |
PTX-KIT1 | Jonard Tools | 241.69 $ | 5 | WIRE WRAP GUN 18 - 32 AWG... |
PTX-KIT1DH | Jonard Tools | 357.49 $ | 5 | WIRE WRAP GUN 18 - 32 AWG... |
KIT REF DESIGN FOR TIRE SENSORMPXY8020A ...
KIT EVALUATION FOR ZOPT2202ZOPT2202 - Li...
KIT EVALUATION FOR ZOPT2201ZOPT2201 - Li...
EVAL KIT FOR ZMID5203ZMID5203 - Proximit...
EVAL KIT FOR ZMID5201ZMID5202 - Proximit...
EVAL KIT FOR ZMID5201ZMID5201 - Proximit...