L201E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are semiconductor-based switches that are used in a variety of applications. TRIACs are one type of thyristors and are used to control power in AC circuits. The L201E3 is a common type of TRIAC, and it can be used for a variety of purposes, including motor control, power control, and as an overvoltage protector. In this article, we will discuss the application field and working principle of the L201E3.

Application Field of L201E3

The L201E3 is a very versatile TRIAC and is used in a variety of applications. It is typically used for motor control, power control, and as an overvoltage protector. It is well-suited for applications that require a low switching power, as it can deliver a switching current of up to 10A and a blocking voltage of up to 800V. The L201E3 also have good thermal stability and can operate at temperatures up to 175℃.

In addition to being used as a motor control device, the L201E3 is also commonly used in AC power switching applications. It can be used to switch low-power AC loads, and it is suitable for applications such as light dimmers and fan control. The L201E3 can also be used in power distribution systems, as it is capable of controlling the power delivered to an AC load in a precise manner. Finally, the L201E3 is often used as an overvoltage protector, as it is capable of limiting the current flow to a certain level, thus preventing overloads.

Working Principle of L201E3

The L201E3 is a two-quadrant, four-terminal TRIAC, and its operation is based on the principle of current commutation. When an AC voltage is applied across the TRIAC, an electric field is created between the main conduction layers. As the electric field increases, the quadrants of the TRIAC begin to turn on, allowing current to flow through the device.

The L201E3 can be triggered in two ways: through a gate signal or by current commutation. When triggered by a gate signal, the L201E3 turns on as soon as the gate signal surpasses a certain voltage level. When triggered by current commutation, the L201E3 turns on after the current flowing through the device reaches a certain level. The maximum current rating of the L201E3 is 10A.

Once triggered, the L201E3 will remain in the on state until the current flowing through the device reduces below the holding current. The holding current is determined by the voltage applied to the device and varies for different models of the L201E3. The gate signal can also be used to turn off the TRIAC, as it can reduce the electric field between the main conduction layers, thus turning off the TRIAC.

Conclusion

The L201E3 is a versatile and reliable TRIAC that is used in a variety of applications. It is suitable for motor control, power control, and as an overvoltage protector. The L201E3 can be triggered by a gate signal or by current commutation, and its maximum current rating is 10A. With its high levels of thermal stability, low switching power, and reliable performance, the L201E3 is an ideal choice for a range of applications.

The specific data is subject to PDF, and the above content is for reference