L6004L8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, also called solid-state switches, are electronic components that are used to control electrical circuits. The Thyristors can be operated in a variety of ways, including on-off switching and phase control. One type of Thyristor is the TRIAC, a three-terminal semiconductor device that is used to control the flow of AC power. Among the TRIACs, L6004L8 is widely used because of its excellent performance, low cost and easy handling. In the following article, we will look at the application field and working principle of the L6004L8.

The application field of L6004L8 is quite broad. It is widely used in the control of electric motors, lighting, heating and other AC circuits. It can control the power output by switching on and off rapidly, and can also be used to control the current by changing the breakpoints of the power output in order to save energy. For example, in heater control applications, the TRIAC can be used to reduce the power output in stages, achieving a gradual change in temperature. It is also used in wireless light dimmers, where it is used to vary the power output to control the brightness of the lighting.

The L6004L8 consists of two thyristors connected in inverse parallel, with a common gate connection. Each thyristor is triggered independently, and the gate connection is used to provide a common gate voltage for both thyristors. The operation of the L6004L8 is controlled by the gate voltage, which is applied to the gate connection. When a positive gate voltage is applied to the gate connection, the device is switched on. A negative gate voltage causes the device to switch off. The device is also capable of maintaining a constant output under varying input voltages.

The working principle of the L6004L8 is based on the concept of gate turn-off. When the gate voltage is at zero volts, the two thyristors are in an off state, and no current can flow through the circuit. When a positive gate voltage is applied, one thyristor is turned on, allowing current to flow through the circuit. If a negative gate voltage is applied, the other thyristor is turned on, which in turn causes the previously turned on thyristor to be turned off. This action completes the gate turn-off process and the device is then switched off. This process can be repeated at a high frequency, allowing the device to switch rapidly and achieve precise control of AC power.

The L6004L8 is an excellent device for AC power control. Its wide application field and simple working principle make it an ideal choice for a range of applications. It is easy to handle and requires minimal maintenance, making it a cost-effective solution for many AC power control applications.

The specific data is subject to PDF, and the above content is for reference