LFE3-150EA-6LFN672C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FPGAs (Field Programmable Gate Array) have become ubiquitous in embedded applications, providing a customizable and reconfigurable solution for hardware that would otherwise have higher required costs due to the complexity of the task.

An example of a particular FPGA is the LFE3-150EA-6LFN672C. This chip contains 48 user I/Os as well as 1,536 6-Input look up table (LUTs). In addition, an on-chip phase-locked loop (PLL) and compatibility with the Enhanced SPI flash family of Electrically Erasable Programmable Read-Only Memory (EEPROM) parts make it well suited for applications that require a high degree of flexibility.

The LFE3-150EA-6LFN672C’s application field is broad and can be adapted to solve many challenging problems. One potential application is signal processing. Before signal processing can occur, the inputs must be digitized. This can be achieved by using the LFE3-150EA-6LFN672C’s 48 user I/Os and its onboard analog-to-digital converter (ADC). The LFE3-150EA-6LFN672C also contains 469 general purpose registers (GPRs), which allows it to efficiently store data and control information.

Once the signal is digitized, it can be processed inside the FPGA. The LFE3-150EA-6LFN672C uses the on-chip PLL to measure the frequency of the input signal and detect peaks and valleys. This allows it to filter out noise and isolate the signal of interest. The LFE3-150EA-6LFN672C also incorporates 1,536 6-input LUTs that can be used to implement complex signal processing algorithms such as signal synthesis, signal reconstruction, and digital-to-analog conversion.

In addition to signal processing, the LFE3-150EA-6LFN672C can also be used for embedded control. The on-board DSP is used to measure analog input voltage, receive digital input signals and transmit digital output signals. This data can be processed on the LFE3-150EA-6LFN672C to create a feedback loop that makes autonomous control systems possible. The EEPROM compatibility also allows the FPGA to be configured to react to changes in the environment, such as temperature or pressure.

The LFE3-150EA-6LFN672C’s working principle revolves around the use of configurable logic blocks (CLBs), which are the building blocks of the FPGA. These CLBs are connected by interconnect lines and can be programmed to implement logic functions. The CLBs can be configured using Verilog or VHDL, making the LFE3-150EA-6LFN672C a powerful and versatile solution for embedded applications.

In summary, the LFE3-150EA-6LFN672C FPGA is an excellent choice for embedded applications that require a high degree of customization and flexibility. Its 48 user I/Os, 1,536 6-input LUTs, 469 GPRs, onboard PLL, and compatibility with the Enhanced SPI flash family of EEPROM parts allow it to be used for a wide range of applications, such as signal processing and embedded control.

The specific data is subject to PDF, and the above content is for reference