LGU2D102MELA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are energy-storing components that use electrolytes to act as the dielectric. This type of capacitor is made with aluminumfoil electrodes, which are impregnated with an electrolyte solution of boric acid or organic solvent. It consists of two thin, metallic layers separated by an electrolyte. These layers are sealed, forming an anode and a cathode. The electric charge is stored in the electrolyte which acts as a dielectric between them. They use a thin, insulating barrier to prevent the charge from leaking away. The current flow in the capacitor is restricted by the barrier, allowing only a small amount of current to pass through.

The LGU2D102MELA is a general purpose aluminum electrolytic capacitor constructed using a non-solid electrolyte. The product is rated at 2V and has a capacitance of 10µF. The operating temperature range is -40°C to 85°C. It is a Low-ESR (Equivalent Series Resistance) and long life product with a maximum ripple current of 1,500mA.

This product is designed for use in a wide range of applications, including DC (direct current) and AC (alternating current) electric motors, DC-DC converters, switching power supplies and general electronics. Its capability of handling high levels of ripple current make it suitable for high frequency, high current electric motor applications. Its long life operation make it suitable for applications where frequent electrical stress occurs, such as long-term operation under harsh environmental conditions.

The device works by means of charge-discharge cycles. The current flow causes positively charged ions to attach themselves to the anode, forming a thin electrolytic film. When the voltage is reversed, the film is broken down and the positive ions are released back into the electrolyte. This process repeats each time the voltage is reversed, allowing the capacitor to store and release electrical energy as needed. This creates an oscillating voltage across the device, which can be used to provide current to the circuit.

The working principle of the LGU2D102MELA is based on the principle of a rechargeable battery, with the charge stored on the electrodes. The current flow causes an ionic film to form on the capacitors anode and cathode, which hold the charge as long as the voltage is maintained. The dielectric is also capable of absorbing energy from the applied voltage, thus enhancing the capacitors performance. It is constructed with a low ESR (equivalent series resistance), long life operation, and a high current rating compared to other similar aluminum electrolytic capacitors.

The LGU2D102MELA is a versatile aluminum electrolytic capacitor, suitable for a range of applications. The product\'s high ripple current handling capabilities make it ideal for motor applications, where it can bear the increased electrical stress experienced by such circuits. It is also suitable for operations where frequencies and temperatures fluctuate, due to its high tolerance levels and long life operation. The device is highly reliable and cost effective, making it a great choice for use in various electronic systems.

The specific data is subject to PDF, and the above content is for reference