LH1501BABTR Relays

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays (SSRs) are widely used electronic devices which can be used to control power circuits without using mechanical contacts. The LH1501BABTR is one of the many SSRs available on the market. It is designed to provide reliable switching, allowing low-voltage control circuits to switch high-voltage AC or DC loads. This SSR is a 4-pin general purpose relay that has a wide range of applications and is suitable for both industrial and consumer applications.

The LH1501BABTR has an extremely wide control voltage range, making it suitable for a variety of systems. It is rated for 6000VAC for high-voltage operation, 15A AC/DC switching, and 0.5A DC control current. It has a maximum control power of 125W and a max ambient temperature of 85 °C. It has an insulation voltage of 2500Vrms, making it a great choice for use in high-voltage applications.

The LH1501BABTR is a low power consumption solid state relay. It utilizes a zero-crossing circuit and MOSFET technology to switch the load without generating electrical noise or producing any mechanical contact wear. It has a hysteresis feature which prevents the solid state relay from being prematurely activated by transients. Inrush current and EMI are also minimized, thanks to the zero-crossing switching feature. The LH1501BABTR is also designed to be extremely reliable and has an estimated MTTF of about 25 years.

The LH1501BABTR is an ideal choice for a variety of industrial and consumer applications. Some of the most common applications include motor control, lighting control, refrigeration and air-conditioning control, process control, home automation, security systems, and industrial machine control. This solid state relay can be used in AC or DC circuits with an AC/DC switching voltage up to 15A and a DC control current up to 0.5A.

The working principle of the LH1501BABTR is quite simple. When a control voltage, usually a DC voltage, is applied to the control terminals of the SSR, an AC voltage is generated across the output terminals. This AC voltage then causes the MOSFETs within the SSR to switch on, allowing current to flow through the load. The MOSFETs remain on until the control voltage is removed, at which point the AC voltage across the output terminals is cut, and the MOSFETs switch off.

The LH1501BABTR is a great choice for a variety of industrial and consumer applications. Its wide control voltage range makes it suitable for a variety of systems, while its zero-crossing switching feature helps to minimize inrush current and EMI. Its reliable mounting and long-term operation mean that it will provide reliable switching for many years to come.

The specific data is subject to PDF, and the above content is for reference