LKX2G331MESC30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitor made with two aluminum foil electrodes with paper or plastic film insulation between them. The aluminum foil electrodes are placed in a electrolyte bath creating a polarized capacitor that stores energy similar to a battery. The LKX2G331MESC30 is one type of aluminum electrolytic capacitor, usually found in electrical systems with low frequency and relatively large current requirements.

Uses of the LKX2G331MESC30

The LKX2G331MESC30 is designed for power factor correction circuits, motor timing circuits, and similar industrial grade applications. It is often used in industrial grade power supplies as a filtering device to help reduce electrical noise and improve power efficiency. It is most commonly found in high power applications because it can handle large current loads without overheating.

Features of the LKX2G331MESC30

The LKX2G331MESC30 is a polarized aluminum electrolytic capacitor. It has a voltage rating of 250 volts, a capacitance of 330 micro farads, and a ripple current of 1.9 A (at a frequency of 40Khz and a temperature of 105 degrees C). The capacitor has a maximum operating temperature of 85 degrees C and a minimum operating temperature of -25 degrees C. It also has a rated life of 5000 hours at 20 degrees C and is RoHS compliant.

Working Principle of the LKX2G331MESC30

The LKX2G331MESC30 aluminum electrolytic capacitor works by storing electrical energy as a potential difference between two electrodes in a liquid electrolyte. As a result, it acts as an energy storage device similar to a battery. When an electrical current is applied to the capacitor, it creates a charge on the capacitor plates and the electrolyte acts to cancel out the charge. This process is known as capacitance and it is what allows the LKX2G331MESC30 to store and release energy.

Conclusion

The LKX2G331MESC30 is a type of aluminum electrolytic capacitor that is typically used in industrial grade electrical systems with low frequency and relatively large current requirements. It can handle high current loads without overheating, and it has a long rated life of 5000 hours at 20 degrees C. It works by storing electrical energy as a potential difference between two electrodes in a liquid electrolyte, creating a charge on the capacitor plates and allowing it to store and release energy.

The specific data is subject to PDF, and the above content is for reference