LM20154MHX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM20154MHX/NOPB is a monolithic integrated circuit developed by Texas Instruments, which is a DC DC switching regulator. It is mainly used for conversion of input voltages ranging from 2V to 24V and provides regulated output voltages ranging from 0.8V to VIN. With a switching frequency of 3.5MHz, this regulator is capable of delivering loads up to 2A.

The LM20154MHX/NOPB switching regulator provides an efficient solution for many applications, such as portable consumer electronic devices, communication devices, automotive applications, computer equipment and other consumer electronic devices. Its wide input voltage range, fast response, low drain current and small size makes it suitable for a number of applications.

The LM20154MHX/NOPB switching regulator design consists of an input voltage detector, a constant frequency current-mode PWM controller, and a high side N-channel and low side P-channel power MOSFET switch. The input voltage detector senses the input voltage and turns on the voltage regulating section when the input voltage drops below the LOW voltage setting, providing the selected output voltage during heavy load.

A current-mode PWM controller is used to regulate the output voltage. This is done by sensing the output current and generating a synthetic current waveform proportional to the output load. The PWM controller then compares this waveform with the voltage feedback. The difference between the waveforms is amplified and used to drive the gate of the MOSFET switch.

The MOSFET switch is used to convert unregulated input voltage into a regulated output voltage. The MOSFET switch, which is composed of a N-Channel MOSFET, is responsible for controlling the output by turning it on and off in a specific pattern. At the same time, P-Channel MOSFET is used to discharge the output capacitor and provide the load current when the load is high.

The LM20154MHX/NOPB switching regulator also features an internal thermal shutdown and an external shutdown line, both of which are driven by a comparator. The internal thermal shutdown feature detects the temperature of the switching regulator and shuts it down when it exceeds a preset temperature, protecting the device from thermal damages. The external shutdown line provides a halts the switching regulator, by driving the external shutdown pin low, when the input voltage drops below the pre-set threshold.

In conclusion, the LM20154MHX/NOPB switching regulator provides an efficient solution for many applications. With its wide input voltage range, fast response, low drain current, small size and advanced and protective features, it is the ideal switch regulator solution for many applications.

The specific data is subject to PDF, and the above content is for reference