LMR341G-GTR

Current - Input Bias:	1pA
Supplier Device Package:	6-SSOP
Package / Case:	SOT-23-6
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 5.5 V
Current - Output / Channel:	45mA
Current - Supply:	80µA
Voltage - Input Offset:	250µV
Series:	--
Gain Bandwidth Product:	2MHz
Slew Rate:	1 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	CMOS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The LMR341G-GTR is a high performance, low noise, low power, low voltage operational amplifier that is widely used in a variety of applications. This operational amplifier is designed to provide a high level of accuracy and a wide range of output power while requiring very little power. The LMR341G-GTR has been implemented in a variety of applications such as instrumentation, linear amplifiers, OP amps, and buffer amps. This article will discuss the application fields and the working principles of the LMR341G-GTR.

Applications fields

The LMR341G-GTR can be used in a variety of applications. The most commonly used applications include instrumentation, linear amplifiers, OP amps, and buffer amps. In instrumentation applications, the LMR341G-GTR is used to measure various electrical parameters, such as voltage, current, frequency, and power. This opamp is also used in linear amplifiers to amplify small signals and reduce noise. In addition, this opamp can be used in OP and buffer amp applications to convert DC signals to AC signals or for low-power digital applications.

Instrumentation Applications

In instrumentation applications, the LMR341G-GTR is used to measure and monitor various electrical input signals. This opamp is used to accurately measure the level of electrical inputs such as voltage, current, and frequency. It is also used to measure the power in a circuit. The output voltage can be set to a specific value or adjusted by adding the correct resistive or capacitive feedbacks. The output can also be adjusted to any level within the range of 0 to 8V.

Linear Amplifier Applications

In linear amplifier applications, the LMR341G-GTR is used to amplify small electrical signals while reducing noise. This opamp is designed to have high gain and very low noise. The typical gain of the LMR341G-GTR is around 100dB. This high gain allows the device to amplify weak electrical signals and reduce noise. The LMR341G- GTR can also be used in video applications to create video signals from small electrical signals.

OP Amp Applications

The LMR341G-GTR can also be used in OP amp applications. This opamp is designed to supply large amounts of power while having very low noise and fast response times. The typical output power is around 20W. This device has a large number of inputs and outputs that allow it to be used in a variety of different applications. This opamp can be used in DC to AC signal conversion, low power digital applications, and other similar applications.

Buffer Amp Applications

The LMR341G-GTR can also be used in buffer amp applications. This device is designed to be used in low voltage and low power applications. It has a fast response time and low power consumption, making it an ideal choice for buffer amp applications. This opamp can be used to convert the DC input signals to AC output signals while providing a low voltage output. This opamp is also used to increase the current capacity of the signal while maintaining the low voltage output.

Working Principle

The working principle of the LMR341G-GTR is based on the two-stage current mirror amplifier design. This device consists of two transistors that act as current mirror amplifiers. The output voltage is determined by the current difference between the two transistors. This design reduces power consumption while increasing the bandwidth and gain of the device. The circuit design also reduces the noise generated by the device.

Conclusion

The LMR341G-GTR is a high performance, low noise, low power operational amplifier. This operational amplifier is used in a variety of applications such as instrumentation, linear amplifiers, OP amps, and buffer amps. In instrumentation applications, the LMR341G-GTR is used to measure various electrical parameters. It is also used in linear amplifiers to amplify small signals and reduce noise. Furthermore, the device can be used in OP and buffer amp applications to convert DC signals to AC signals or for low-power digital applications. The working principle of the LMR341G-GTR is based on the two-stage current mirror amplifier design. This opamp is designed to provide a high level of accuracy and a wide range of output power while requiring very little power.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description