LMV712IDGSRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LMV712IDGSRG4 is an integrated differential amplifier primarily designed for instrumentation, OP amplifiers, buffer amplifiers, and other linear applications. It is a monolithic integrated circuit (IC) with one-dimensional industrial standard SMD package. As suggested by its "LMV" prefix, the IC has a voltage-variable gain-stage designed to operate with a high unity-gain differential voltage. As with all ICs, the LMV712IDGSRG4 offers high gain and low output noise, ideal for instrumentation applications.

The LMV712IDGSRG4 features a differential input design which allows the use of high and low level signals at the same time. The input can accept input signals surpassing the power supply voltage of ±15V. Output impedance is very low, allowing the output to drive a current up to a few milliamps without additional circuitry. This makes the IC more suitable and efficient for driving capacitive loads, such as capacitive video signals.

In terms of its circuit topology, the LMV712IDGSRG4 consists of one gain stage and two floating current sources to sink or source current (depending on the input voltage). The floating current sources enable the IC to operate in the differential voltage amplification mode to achieve a gain of up to 1x without additional circuitry. Furthermore, the floating current sources also act to separate the input and output signals and thus reduce the potential for noise interference. The LMV712IDGSRG4 comes with a gain setting range of 50 to 200, which enables it to amplify higher or lower amplitude signals as required. The external resistors found on the gain pins are also adjustable to alter the amplifier’s gain.

The LMV712IDGSRG4 contains three inputs, two active and one optional referred to as the input-level control pin. The active inputs are the In+ and the In-pins while the input-level control is the XSR pin. The XSR pin is used to adjust the amplifier’s gain by means of resistors connected to it. The In+ and In- pins are used for the differential voltage input, allowing for both low and high level signals to be applied to each input. The XSR pin is used to adjust the gain by two resistors connected to it.

In terms of internal design, the LMV712IDGSRG4 is a single stage differential input amplifier. Its internal structure consists of two MOSFETs operating in the source-following mode to enhance the gain of the amplifier. This arrangement also reduces the amount of noise generated, leaving the amplifier with a lower noise floor than a conventional amplifier. Also, since the input transistors of the LMV712IDGSRG4 are connected in a cascode configuration, the output of the amplifier operates at a higher voltage than its input, enabling the amplifier to drive heavy capacitive loads.

The outputs of the LMV712IDGSRG4 can be easily buffered by driving a high output impedance load or a low output impedance. In the latter case, an additional circuit is required. The IC features dual output short circuit protection and over-temperature protection so that it can be used in situations where a high transient current or a high temperature environment is expected.

Overall, the LMV712IDGSRG4 is a voltage-variable gain stage monolithic amplifier ideal for instrumentation applications. With its high gain, low output noise and temperature and overload protection, the LMV712IDGSRG4 makes it a perfect choice for heavy-duty instrumentation requirements.

The specific data is subject to PDF, and the above content is for reference