LMV722IDGKRG4

Current - Input Bias:	260nA
Base Part Number:	LMV722
Supplier Device Package:	8-VSSOP
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-45°C ~ 105°C
Voltage - Supply, Single/Dual (±):	2.2 V ~ 5.5 V
Current - Supply:	2.01mA
Voltage - Input Offset:	80µV
Series:	--
Gain Bandwidth Product:	10MHz
Slew Rate:	5.25 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The LMV722IDGKRG4 is a monolithic low voltage, rail-to-rail, single supply amplifier that is designed to operate on single- and dual-supply systems. It is a high performance, low voltage, fully integrated amplifier and buffer with a wide range of applications including, but not limited to linear amplification, instrumentation, operation amplifiers (OP Amps), and buffer amplifiers.This article details the general characteristics, working principles and application fields of the LMV722IDGKRG4.

General Characteristics

The LMV722IDGKRG4 is a low voltage rail-to-rail amplifier that operates from a single- or dual-supply system. It is designed to work on ±5 to +15V supplies, with a −5 to +15V power range, and a single supply operation range of 0 to +15V.The amplifier has an input common mode voltage range of +0.1V to VCC-/2V and an output voltage range of GND to VCC/2V. The amplification factor can be set between +1V/V and +100V/V with a gain bandwidth product of 1000kHz.The device comes in a space-saving SOT-23 package, offering a wide range of options for designers working with a limited space.

Working Principle

The LMV722IDGKRG4 is an internally compensated amplifier with an open-loop gain of 10,000V/V. The internal compensation is based on an output stage compensation scheme with a Moen\'s loop compensation directly integrated.The amplifier has a wideband frequency response from near DC to 1000kHz, with a small-signal bandwidth of 350kHz at a unity gain. It features nearly zero offset voltage and low input noise to ensure no or minimal distortion for optimum linear performance.The device also provides a wide range of current sources and sinks that can be used to adjust output current to match the external circuits and minimize distortion.

Application Fields

The LMV722IDGKRG4 is suitable for a wide variety of applications, including audio preamplification, electrical measurements, video amplifiers, linear drivers, sample-and-hold circuits, low power test and measurement instruments, pulse amplifiers, precision current sources and current control loops.It is particularly suited for high-precision, low power analog-to-digital converters, as well as for instrumentation, operative amplifiers (OP Amps), and buffer amplifiers such as LED drivers, moving coil amplifiers, piezoelectric amplifiers and piezoelectric acoustical motors.

Conclusion

In conclusion, the LMV722IDGKRG4 is a high performance, low voltage, rail-to-rail amplifier designed to work on single- and dual-supply systems. Its wide range of applications, including linear amplifiers, instrumentation, OP Amps, and buffer amplifiers, ensures that it can be used for almost any application. Its open-loop gain of 10,000V/V, wide-band frequency response, low input noise, and wide current range make it well suited for high-precision analog-to-digital converters, test and measurement instruments, and other low voltage applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description