LPX471M200A5P3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are polarized electronic components that use aluminum oxide as a dielectric and rely on a reference electrode for operation. The LPX471M200A5P3 is a very popular type of electrolytic capacitor, renowned for its dependability and power efficiency. This article will explain the various ways in which this capacitor is used and employed, and provide an explanation of its basic working principles.

LPX471M200A5P3 Application Field

The LPX471M200A5P3 can be used for many different applications. Its low ESR (equivalent series resistance) capabilities make it useful in power filters, where high current is needed, as well as in signal processing and circuit protection. It is also commonly used as an output stage filter in audio systems, where its very low equivalent series inductance (ESL) allows for superior transient response. Many high-end audio systems use LPX471M200A5P3 aluminum electrolytic capacitors in critical components, as they are known for their quality and reliability.

In addition, LPX471M200A5P3 capacitors are often used in battery-powered applications, as they can provide a very long service life even when subject to continuous charge and discharge cycles. This makes them ideal for consumer electronics such as portable game consoles, where extended “play” sessions can put a strain on the battery. As such, the LPX471M200A5P3 can be found in many consumer electronic devices.

LPX471M200A5P3 Working Principle

To understand how the LPX471M200A5P3 works, it is necessary to understand how a typical aluminum electrolytic capacitor works. In general, these capacitors are constructed from two metallic plates separated by a thin layer of dielectric material, usually an oxide of aluminum. When a voltage is applied to the plates, electrons begin to accumulate on the negative plate, causing a buildup of negative charge which in turn repels additional electrons from the positive plate. The resulting electric field is what enables a capacitor to store electric energy.

The LPX471M200A5P3, however, uses a slightly different construction. Instead of the aluminum oxide dielectric, a more efficient resin layer is used between the two metallic plates. This allows the capacitor to have a much higher voltage handling capabilities and also enables it to store a greater amount of energy. Moreover, the low ESL values allow for improved transient response, meaning that the capacitor can respond more quickly to changes in the input signal.

In addition, the LPX471M200A5P3 capacitor also has a higher temperature rating than conventional electrolytic capacitors, allowing it to be used in environments that would normally be too hot for other types of capacitors. This is due to the higher dielectric constant of the aluminum oxide-resin mixture, which allows it to maintain its capacitance, even when subjected to large temperature variations.

Conclusion

The LPX471M200A5P3 Aluminum Electrolytic Capacitor is a very popular component, renowned for its dependability and power efficiency. Its low ESR capabilities make it ideal for power applications, while its excellent transient response makes it suitable for a variety of signal conditioning applications. Furthermore, its high temperature rating makes it suitable for a variety of environments, while its high capacitance and voltage rating make it suitable for a variety of applications. Overall, the LPX471M200A5P3 is an excellent choice for audio, power, and consumer applications.

The specific data is subject to PDF, and the above content is for reference