LSM140 MELF

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	40V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	580mV @ 1A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 40V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	DO-213AB, MELF
Supplier Device Package:	DO-213AB
Operating Temperature - Junction:	-65°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

。

Introduction

MELF (Metal Electrode Leadless Face) is a type of diode that is commonly used in low-power applications. It has two distinct advantages over other rectifiers: it is more compact and can handle higher power ratings than standard rectifiers. Consequently, it is used in many different types of applications, such as power supplies, radio frequency (RF) power amplifiers, and switching circuits. In this article, we will discuss the application and working principle of the MELF 140, an example of a single diode rectifier component.

Application

The MELF 140 is a versatile device that can be used in various types of power circuits. Its most commonly known application is in the construction of half-wave and full-wave rectifiers. When combined with other components, such as capacitors and resistors, it can be used to build AC-DC converters and voltage regulators. Additionally, it can be used as a controllable switch for turning power on and off in a circuit. It is also used to control the impedance of an audio circuit.

Working Principle

The MELF 140 is constructed in a very simple manner. It is made up of two terminals, an anode and a cathode, that form the outside of the diode structure. When a voltage is applied to the diode, electric current flows between the two terminals. When the voltage is negative with respect to the anode, the diode acts as an open circuit, allowing no current to flow. When the voltage is positive with respect to the anode, the diode acts as a closed circuit, allowing the current to flow. This fundamental principle is the basis for the functioning of the MELF 140. It allows the device to be used in both alternating current (AC) and direct current (DC) circuits. In AC circuits, the MELF 140 acts as a rectifier by converting an AC voltage into a DC voltage. In DC circuits, it acts as a switch by turning the current on and off. This makes it an extremely versatile component in many different types of applications.

Conclusion

The MELF 140 is a single diode rectifier component with a wide variety of applications. It is used in power supplies, radio frequency amplifiers, and various other circuits as a controllable switch or rectifier. Its simple construction and well-defined working principle make it a reliable and cost-effective solution for many different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description