LSM180GE3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are components that are vital for many electrical circuits and devices. The LSM180GE3/TR13 is a single rectifier diode, and these devices are typically used to convert alternating current (AC) to direct current (DC). This type of diode can be found in many applications such as power supplies, LED drivers, and power adapters. This article will discuss the LSM180GE3/TR13, its application field and working principles.

The LSM180GE3/TR13 is a single rectifier diode with a maximum forward current rating of 4 Amps (A) and a forward voltages drop of 1.2 volts (V). This diode also features a low forward voltage, fast switching speed, and high frequency capabilities. Its maximum reverse voltage is 180 V with a maximum peak reverse voltage of 500 V and a junction temperature range of -55 °C to +150 °C. Furthermore, the reverse leakage current at a reverse voltage of 25 V (IR) is 4 mA with a maximum avalanche energy rating of 41 mJ. The LSM180GE3/TR13 is a relatively low cost device and is typically used in many digital and analog circuits.

In terms of its application field, the LSM180GE3/TR13 is typically used in applications such as power supplies, LED drivers, and power adapters. In power supplies, the main purpose of the diode is to protect a circuit or device from over-voltages. The diode will effectively limit the amount of current that can enter the device to prevent it from being damaged by excessive voltage. Also, the diode can be used to rectify AC voltage to DC voltage. This is done by allowing the positive half of the AC cycle to pass through the circuit, while the negative half is prevented from passing through by the diode’s junction.

In LED drivers, diodes are used to protect LEDs from having too much current applied to them. The diode will act as a valve to limit the amount of current that can pass through, thus protecting the LEDs. Lastly, in power adapters, diodes can be used to convert AC voltage to DC voltage, allowing devices that require DC power to operate off of AC power.

The operation of a rectifier diode is based on the principle of P-N junction. As current flows through the diode, electrons from the negative side flow towards the positive side and holes from the positive side flow towards the negative side. This movement creates potential barriers that allow current to only flow through the diode in a specific direction, usually from the anode (positive side) to the cathode (negative side). This is why diodes are said to “rectify” a current or voltage.

The LSM180GE3/TR13 is a single rectifier diode with low forward voltage and fast switching speed, suitable for many digital and analog applications. It is typically used in power supplies, LED drivers, and power adapters in situations where AC voltage needs to be converted to DC voltage and to protect devices from overvoltages. Thanks to its P-N junction, it can only allow current to pass through it in one direction, governing the movement of electrons and holes, thereby rectifying the current.

The specific data is subject to PDF, and the above content is for reference