Current - Output (Typ):	70mA @ 4.5V
Base Part Number:	LT1018
Supplier Device Package:	8-SOIC
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C
Hysteresis:	--
Propagation Delay (Max):	6µs
CMRR, PSRR (Typ):	115dB CMRR, 110dB PSRR
Current - Quiescent (Max):	250µA
Series:	--
Current - Input Bias (Max):	0.075µA @ ±20V
Voltage - Input Offset (Max):	1mV @ ±20V
Voltage - Supply, Single/Dual (±):	1.1 V ~ 40 V, ±0.55 V ~ 20 V
Output Type:	Pull Up
Number of Elements:	2
Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1018IS8#TRPBF: General Description and Working Principles of Linear - Comparators

The LT1018IS8#TRPBF is a linear - comparators type device designed to compare input signals, detect differences between them and report the results. It is a monolithic chip with an analog-to-digital conversion function integrated into one, making it suitable for use in a variety of applications. Generally speaking, the LT1018IS8#TRPBF is an analog differential comparator featuring an on-chip circuit with two high impedance inputs and one output. Its main purpose is to compare two input signals and produce an output signal as a result of the comparison. Once the comparison is conducted, the output signal is then ready for further processing. Depending on the two input signals, the output can be either a logic high (1) or logic low (0) signal. Because of its analog-to-digital conversion capability, the LT1018IS8#TRPBF device can be used on various applications. Among these are in digital circuits such as computers and other microprocessors, and analog-to-digital converters as well as data acquisition systems. Other uses include comparison of input values in operational amplifiers, PID (Proportional-Integral-Derivative) control systems, and so on. When considering the usage of the LT1018IS8#TRPBF device, the input signals should first be thoroughly checked to ensure proper performance. This is because the comparator must get direct currents to further compare two input signals. Without proper input signals, the output result might not be accurate. Hence, it is important to know the normal input voltages and the allowable input voltage and temperature ranges. Aside from the input supply, the LT1018IS8#TRPBF also has a power supply pin, which is the voltage source with which the internal circuitry is powered. The power supply voltage needed by this device is usually +5V, plus or minus 10%. The power supply can also be taken from an external source, such as a battery. When it comes to its working principle, the LT1018IS8#TRPBF can be used to compare two input signals, and produce an output signal indicating the difference between them. To do this, it is necessary to apply two voltages of varying potential (in most cases, a positive voltage and a negative voltage) to the two input pins of the comparator. The output result will then be the result of the comparison between the two input signals – either a logic high (1) or a logic low (0). Once the result of the comparison is obtained, it can be used for further processing. The main benefits of using this device are its wide range of applications, its small size, its low cost, and its high accuracy. With its analog-to-digital conversion function, it can save a lot of time and energy in measurement applications. Furthermore, its high accuracy means that the results obtained are generally quite accurate. In conclusion, the LT1018IS8#TRPBF is a linear - comparators type device with an analog-to-digital conversion function integrated into one, and is suitable for a variety of applications. This device can compare two input signals, and produce an output signal as a result of the comparison. It is widely used in digital circuits, data acquisition systems, and PID control systems, among others. The main advantages of using this device are its wide range of applications, small size, low cost, and high accuracy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description