LT1056S8#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1056S8#PBF

The LT1056S8#PBF is a general purpose operational amplifier (op-amp) that is widely used in both industrial and commercial applications. It is commonly used in audio, video and medical applications. It serves as a voltage amplifier, buffer and level detector.

Application Field

The LT1056S8#PBF is an ideal choice for instrumentation, medical and audio/video applications, providing high performance and flexibility. As a general purpose amplifier, it is particularly suitable for instrumentation, feedback, sensing and voltage-gain applications.

• Instrumentation: The LT1056S8#PBF offers a wide gain range, with low noise and output impedance, enabling precision instrumentation for sensor, load and conductor measurements.
• Medical: Due to its low noise, fast settling time and high accuracy, the LT1056S8#PBF amplifiers are used in medical applications such as pulse oximeters, imaging equipment, pacemakers and blood pressure monitors.
• Audio/video: The synchronous roll-off architecture of the LT1056S8#PBF and its low distortion makes it well suited for audio and video applications such as equalizers, mixers and speakers.

Working Principle

An op-amp consists of two inputs and one output. The two inputs are said to be in-phase and out-of-phase. The in-phase input is the non-inverting input, while the out-of-phase input is the inverting input. The two inputs, in-phase and out-of-phase, interact and create the output voltage. Generally, the LT1056S8#PBF has a gain structure of up to 90 dB, with a fast settling time of 1.5 μs. The amplifier has a fast response time of 1 μs, low noise of 7 nV/√Hz and a high voltage gain of 50 dB.

The voltage gain is determined by the ratio of the feedback resistor (Rf) to the input resistors (Rin). The gain of the op-amp (AV) can be calculated using the following formula: AV = -Rf/Rin. For example, if the input resistor (Rin) is set at 10 kΩ and the feedback resistor (Rf) is set at 1 kΩ, then the gain of the op-amp will be -10.

In addition, the LT1056S8#PBF op-amp also offers wide bandwidths and low distortion, making it suitable for audio and video applications. The op-amp has a wide frequency range of 10 Hz - 500 kHz, a low output distortion of 0.004% and a high common-mode rejection ratio of 80 dB.

Overall, the LT1056S8#PBF op-amp is a highly versatile amplifier suitable for a variety of applications. Its low noise, fast response time and wide gain range make it an ideal choice for instrumentation, audio/video and medical applications.

The specific data is subject to PDF, and the above content is for reference