LT1112S8#TRPBF

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Amplifier Type:	General Purpose
Number of Circuits:	2
Output Type:	--
Slew Rate:	0.3 V/µs
Gain Bandwidth Product:	750kHz
Current - Input Bias:	100pA
Voltage - Input Offset:	25µV
Current - Supply:	350µA
Voltage - Supply, Single/Dual (±):	2 V ~ 40 V, ±1 V ~ 20 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SO
Base Part Number:	LT1112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

The LT1112S8#TRPBF is an operational amplifier that enables signals to be used in industrial, medical and commercial applications. This device is one of the most popular models from the popular LT1122S8#TRPBF series.Instrumentation amplifiers are non-inverting amplifiers used to capture sensitive data from low-level signals. They offer the desired flexibility and gain accuracy that is required for specific applications in different operating continuums of process control, medical instrumentation and measuring systems.The LT1112S8#TRPBF can be used in applications with a large number of sensor readings. This device has a full-featured low-noise instrumentation amplifier with a high input impedance, high gain accuracy and low power consumption.It provides programmability of gain and offset voltage, allowing it to be used in applications with multiple sensor readings and signal isolation. The gain of the LT1112S8#TRPBF can be set using two external resistors, R1 and R2. The gain is determined by the ratio of the two resistors:Gain = (R1 + R2)/R2The gain is expressed in decibels (dB) and is a measure of the signal amplification. A gain of 0 dB means that the signal is not amplified, while a gain of 10 dB means that the signal is amplified 10 times. A gain of 20 dB means that the signal is amplified 100 times.The LT1112S8#TRPBF has a number of features that make it an ideal solution for precision instrumentation amplifiers. It offers a low power operation, wide common mode input range, low input offset voltage, low input bias current and fast enable/disable response time. It also features a high-speed 200MHz gain bandwidth product and ultra-low 0.9V RMS noise. In addition to its instrumentation-amplifier capabilities, the LT1112S8#TRPBF can also be used as an operational amplifier or buffer amplifier. As an operational amplifier, the LT1112S8#TRPBF can be used to amplify signals or control the output of a signal according to the input voltage. As a buffer amplifier, it can be used to isolate a signal from outside interference and avoid the distortion of the signal. The LT1112S8#TRPBF is an ideal solution for applications requiring precise signal amplification and accuracy, such as medical instrumentation, process control systems, measuring systems and other instrumentation. It is also suitable for use in a variety of other applications where accuracy and low noise are important.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description