LT1571EGN-5#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1571EGN-5#PBF is an integrated step-up switching regulator nominally rated at 15V and 1.5A. Designed for high-efficiency line-powered applications, the internal power switches can operate up to 6V from the regulated output voltage. The device has an operational quiescent current of typically 2mA and requires only two external capacitors for normal operation. It can deliver up to 1.5A of load current at up to 7V dropout, and supports a wide range of input voltages from 6V to 36V. As a result, the LT1571 EGN-5#PBF is a popular choice for many power management applications, and it is also used in battery charging applications, as it is an optimal power solution for boosting battery voltage and extending battery run time.

The LT1571 EGN-5#PBF will boost a voltage source, such as a single-cell Li-ion battery, to a more convenient voltage. This device is specifically designed to enable fast charging of single-cell Li-ion batteries while still providing good battery life. It can be used with a variety of standard Li-ion cell chemistries, such as Li-Po, LiFePO, and LiCoO2. It can also be used as a charger IC in applications such as medical devices, consumer products, and portable electronics where extended battery run time is essential. The LT1571 EGN-5#PBF utilizes synchronous rectification to achieve lower quiescent current and better efficiency compared to older non-synchronous topologies.

The device incorporates a powerful regulation loop that ensures good regulation of the system voltage in a wide range of conditions. The LT1571 EGN-5#PBF is also a continuous-mode controller, which means that it can be used to control the power delivery to a load and maintain the battery voltage at a desired level. The LT1571 EGN-5#PBF also includes a variety of safety features, such as over-current, over-voltage, under-voltage, and thermal-short-circuit protection, to ensure the device as well as the battery pack is protected from damage and overcharging.

The LT1571 EGN-5#PBF utilizes a continuous-mode PWM control scheme that uses an open-circuit voltage feedback loop, coupled with an adaptive on-time control to regulate loop parameters and meet the constant voltage, constant current requirements of a Li-ion battery. This scheme incorporates a current-mode control loop with an externally adjustable oscillator period that provides fast transient response and excellent line and load regulation characteristics. In addition, the device includes a low-current sleep mode that minimizes no-load power consumption while the device is not actively charging the battery, thus extending total run time.

The pinout of the chip is quite simple and can be easily integrated into a battery-management system. The main pins are: Input (VIN), Output (VOUT), Sense (VSENSE), Reference (VREF), Clock (CLK), Enable (EN), and GND. The board also includes a battery indicator LED, a temperature-sensing diode, and a switching transistor. The chip also contains additional protection circuits such as a thermal protection circuit, an over-current protection circuit, and a low-battery charge protection circuit.

Overall, the LT1571EGN-5#PBF is a versatile battery charging solution for many different types of applications. Its wide input voltage range allows for the efficient use of renewable sources such as wind and solar, and its fast transient response makes it suitable for use in fast-charging applications. The device integrates many important safety features, making it ideal for use in battery-pack systems where battery safety is critical. In addition, its low quiescent current and adaptive on-time control make it an ideal choice for many different types of power management and battery charging applications.

The specific data is subject to PDF, and the above content is for reference