LT1640LIS8#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LT1640LIS8#PBF is a power management integrated circuit (PMIC) under Texas Instruments\' Hot Swap Controllers product line. It is designed for eliminating circuit damages and providing protections to downstream components caused by unwanted hot-swapping of loads. In addition, LT1640LIS8#PBF also acts a voltage shunt to provide overvoltage and undervoltage protection and supervising when loads are connected or disconnected.

The LT1640LIS8#PBF contains all the circuitry required to achieve undervoltage protection, overvoltage protection, current limit, and fault status signal. The integrated circuit integrates a power pass element that is protected by current-limit and thermal-shutdown circuitry. This pass element allows approximately 18A of current to flow with a 0.03 ohm sense resistor. An internal slew-rate control helps to minimize current transients when the fault signal is activated. By connecting an external MOSFET to the output of the device, the user can further increase the current protection without compromising speed or transient response.via Analog

Application Field

The LT1640LIS8#PBF can be found in the applications involving the hot-swapping of loads such as data center devices, automotive products and smart power sources. As the hot-swapping often generates damaging transients spike, the integrated circuit provides protection for downstream components and protect the circuit from damages. The LT1640LIS8#PBF also serves as a voltage shunt, preventing overvoltage and undervoltage situations while loads are connected or disconnected.

Working Principle

Four major parts of the integrated circuit can be identified: pass element, current limiter, sense amplifier, and voltage limiter. The pass element and the current limiter protect the downstream components by limiting the output current to 18A. When the current exceeds the limit, the circuit shuts down, protecting the load and the connected circuits. The sense amplifier amplifies the voltage to test and detect faults, accounting for the accurate interdiction of faulty situation. The voltage limiter monitors the downstream voltage, availing protection from overvoltage and undervoltage conditions.

Along with the four major parts, the device also integrates several protection features, providing protections from resultant overshoot and undershoot of voltages, thermal shutdown and inrush current limit. Furthermore, 500ns fault signal latency would enable the system to detect and react to any issue promptly.

Conclusion

In short, LT1640LIS8#PBF is under the Hot Swap Controllers product line of PMIC developed by Texas Instruments, featuring great protection functions for hot-swapping, overvoltage and undervoltage situations. Integrated with multiple detectors and limiters, the chip ensures the accuracy of signal detection and the safety of downstream components.

The specific data is subject to PDF, and the above content is for reference