LT1641CS8#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT1641CS8#PBF, manufactured by Linear Technology Corp., is a Hot Swap Controllers power management integrated circuit (PMIC) belonging to their standard Linear Technology product family. The LT1641CS8#PBF PMIC is a high speed current-mode MOSFET controller for use in controlling input power to a system or board and offers integrated hot swap capabilities for systems such as telecom and networking systems, broadcast systems, computer systems, and medical equipment.

ThisHot Swap Controllers PMIC enables safe power-up and power-down of systems by managing transistor biasing, allowing the semiconductor device to operate within its safe operating region. With its current-mode control and PFC, the LT1641CS8#PBF stabilizes the input current, allowing for an effective DC voltage i/p characteristic and performs better than basic PWM controllers by maintaining the input current below a proposed level. This protection type allows external hot swap MOSFETs to protect the system\'s power supply from inrush current and voltage transients.

The LT1641CS8#PBF operates with an input voltage ranging from 4.8 V to 16 V and an output voltage ranging from 0.8 V to 12 V with a maximum load current of 16 A. It utilizes Type II compensation, using an external capacitor and resistor to control the switching frequency of the power supply and allows the frequency to be adjusted up to 300 kHz. The PMIC provides both internal and external control, allowing the user to set the output voltage with an external reference voltage.

The LT1641CS8#PBF Hot Swap Controllers PMIC also features an external clock synchronization, as well as protection features such as cycle-by-cycle current limiting, input UVLO, output UVLO and thermal shutdown. It has an integrated charge pump that provides gate drive voltage for the external power switch, allowing it to operate with low gate drive MOSFETs, which improve the efficiency and reduce system cost. It also features an adjustable undervoltage lockout (UVLO) response threshold, adjustable overvoltage protection (OVP) trip point, and adjustable peak current control limiting.

The LT1641CS8#PBF Hot Swap Controllers PMIC has current-mode control with an adjustable peak current limit and an adjustable current sense voltage position. The PMIC also offers a high-speed line regulator with a fast transient response and a wide operating range, as well as a wide set of Protection capabilities. The PMIC is designed to minimize the impact of load and line disturbances while maintaining the desired output voltage. It has been tested and proven compliant with signals generated from hot plug and over-current protection circuits.

With its current-mode architecture and integrated protection features, the LT1641CS8#PBF Hot Swap Controllers PMIC makes it easier to design and implement a reliable hot swap power system. The circuit is simple to administer, allowing for efficient start-up and power down with minimal effort. It is suitable for a wide variety of applications including telecom and networking systems, broadcast systems, medical equipment, and computer systems.

The specific data is subject to PDF, and the above content is for reference