LTC1380CGN#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC1380CGN#TRPBF is an analog switch, multiplexer, or demultiplexer provided in a 2mm × 2mm 14-pin DFN package or a SOIC package. Utilizing a low-cost, low-power design, this analog switch allows one of two analog signals to be connected through the device when active, with only 100Ω of on resistance. The device can be operated with control voltages ranging from –15V to 15V.

This LTC1380CGN#TRPBF device can be used for various applications such as audio/video switching, cross-point switching, analog multiplexing, digital-to-analog conversion, circuit protection, and more. The device works by using an internal series switch to connect the non-inverting input to either the inverting input (commonly used in multiplexer applications) or to the inverting output (used in demultiplexer applications). This allows for the connection of two analog signals, with a maximum current rating of 30mA.

The device also works with a “sync” input pin, which is an additional input port that allows the device to connect or disconnect both switches simultaneously. This feature reduces the time needed to switch between the two input signals and allows for faster switching speeds. With a switching speed of 2ns and a propagation delay of 4ns, the device is well suited for use in high-speed applications.

The device is designed to deliver a high signal-to-noise ratio (SNR), with a signal-to- noise ratio of 85dB and a total harmonic distortion of 0.002%. The device also features a gain control, allowing the user to adjust the signal strength of the signal being switched. With a wide dynamic range and low input power requirements, the LTC1380CGN#TRPBF is an ideal solution for demanding applications where a low-power analog switch is required.

As far as power requirements are concerned, the device requires a single 5V power supply and consumes a maximum of 13mW of power when in active mode and 1mW in standby mode. This low power requirement makes the device ideal for battery-powered applications. Additionally, the device has an enable/disable input that allows the user to manually turn the device off when not in use.

Overall, the LTC1380CGN#TRPBF is an excellent choice for analog switching applications. With its low-power design, high SNR and low noise, this device can be used in a variety of applications such as audio and video switching, audio switching, analog multiplexing and circuit protection. The added features such as the sync input, gain control, and enable/disable input also make it a great option for demanding applications.

The specific data is subject to PDF, and the above content is for reference