LTC4219IDHC-5#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Management Integrated Circuits (PMICs) are integrated circuits that convert and regulate the power fed into low voltage and high current electronic systems. This can be done through a variety of functions, such as driving motors and relays, controlling energy use and dissipation, and providing steady and accurate voltage supply. Hot Swap Controllers are a type of PMIC that is designed to power up, protect, monitor, and control the system when dealing with hot-plugging and hot-swapping, allowing safe powering on/off operation and dynamic load/unload. One such hot swap controller is the LTC4219IDHC-5#TRPBF by Linear Technology.

The LTC4219IDHC-5#TRPBF is a precision Hot SwapTM controller that provides board level protection and circuit monitoring for hot-plugging devices. It features an internally-set 1.23V threshold for slow start load ramp up, overvoltage and overcurrent protection, as well as dynamic load sharing. The device also features inrush current limiting, soft start, and programmable open-drain power good pin. With its protection circuitry ensured, the LTC4219IDHC-5#TRPBF enables safe and reliable hot-plugging/hot-swapping operations for any power sensitive devices.

The working principle of the LTC4219IDHC-5#TRPBF is a combination of sensing and source follower structure. A voltage sense circuit consists of a voltage divider to sense the input voltage and follows a comparator-based circuit to detect overvoltage events. In addition to the overvoltage circuit, the controller also utilizes a 0.5 ohm sense resistor in series with an I-V sensing circuit to detect overcurrent events. This circuit will detect when the current hits a certain level and trip the circuit when it occurs. The circuit also has an input hysteresis, which prevents against false trips.

Once the circuit detects an overvoltage or overcurrent condition, it will activate the load transfer switch that will disconnect the circuit from the power source and avoid any possible damage. The LTC4219IDHC-5#TRPBF also features a programmable open drain power good pin, which can be used to indicate the power status and enable the system to be fault tolerant. The device is also designed to have low quiescent current, a low overall power consumption, and an extended temperature operating range.

In sum, the LTC4219IDHC-5#TRPBF is a reliable and robust hot swap controller that addresses the need for safety and reliability in hot plugging or hot swapping operations. The built-in voltage and current sensing capabilities as well as the programmable open-drain power good pin make it ideal for applications such as hot swapping circuit boards, hard drives, and memory sticks in mission critical server systems. Additionally, its small size, low quiescent current and low power consumption make it suitable for remote or embedded applications.

The specific data is subject to PDF, and the above content is for reference