LTC4226CUD-2#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC4226CUD-2#TRPBF is an advanced power management integrated circuit (PMIC) designed for Hot Swap applications. The integrated circuit provides reverses current protection, over current and under current protection, over voltage and under voltage protection, temperature and current sensing, power control, and protection against short circuits, excessive loading, and intermittent faults.

The LTC4226CUD-2#TRPBF Hot Swap Controller operates in a reverse polarity, allowing an external power source to turn on a powered device by slowly increasing the voltage and current. The controller sets the limit of how much power is allowed, controlling the amount of current flowing through a system so it can start up without damaging the power source or circuitry.

The Hot Swap Controller monitors the voltage and current conditions of the powered device and the power supply. The controller then adjusts the power and current accordingly. The controller can detect an OVP, OCP, and over-temperature conditions. If a fault is detected, the controller will either shut off the power or send a signal via an external shutdown pin.

The LTC4226CUD-2#TRPBF Hot Swap Controller provides a wide switching range and high power density, with a minimum current setting of 0.7V and maximum current of 6V. The controller is designed for applications where an external power source may be necessary to turn on the powered device and is especially useful for hot-swap designs.

This Hot Swap Controller can be used in a variety of applications including communications, industrial, consumer, and medical power systems. It is ideal for Hot Swap applications where a power supply needs to be turned on without powering down the entire system. It has the ability to increase the power and current applied to the connected device by using the external power source or the power supply if needed. This ensures that the power protection is maintained even in areas where there is no external power source.

In addition, the LTC4226CUD-2#TRPBF Hot Swap Controller can be used to provide active pull-down on the outputs of analog signals, eliminating the need for bulky transformers or toroidal inductors that are usually used in active pull-down stages. It also has a built-in clamp circuit that can be used to protect the circuits against EN return transients.

The LTC4226CUD-2#TRPBF Hot Swap Controller is an ideal choice for applications that require power and current management, protection, and power source access in a wide range of conditions. With its integrated reverse current protection, over current and under current protection, temperature and current sensing, power control, and protection against short circuits, excessive loading, and intermittent faults, the Hot Swap Controller can effectively prevent faults and provide reliable power management for a variety of power systems.

The specific data is subject to PDF, and the above content is for reference