LTC4231CUD-2#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC4231CUD-2 is a Hot Swap controller in the family of Power Management Integrated Circuits (PMICs). It is designed to provide control, diagnostics and protection for Hot Swap applications. The device is intended to be used with N-channel FETs, making it ideal for low voltage applications.

A Hot Swap controller is used to introduce circuit elements into a system without risk of damage to that system. The Hot Swap controller manages the current and voltage limits during insertion and removal of the circuit element, thus ensuring safe operation.

The LTC4231CUD-2 Hot Swap controller detects the presence of a live load and adjusts its current limit setting accordingly. It also monitors the load voltage to detect a fault condition, such as overvoltage, undervoltage and overtemperature. The controller will then disable the load in order to protect the system from any potential damage.

The LTC4231CUD-2 Hot Swap controller provides current monitoring and limit control, as well as fault detection and protection. It has three pins (control pin, current sense pin, and voltage sense pin), and two outputs (enable/disable signal and current limit signal). The control pin is used to enable or disable the Hot Swap controller, while the current sense pin detects the load current and adjusts the current limit signal accordingly. Finally, the voltage sense pin monitors the load voltage and will disable the controller if the load voltage exceeds preconfigured limits.

The controller has an adjustable current limit setting, with a maximum value of 10 mA. It also has an adjustable turn-on and turn-off delay setting, which can be adjusted from 0 to 15 microseconds. Finally, the controller has an adjustable dead time setting, allowing for time for the enable signal to take effect before the current limit signal is activated.

In summary, the LTC4231CUD-2 Hot Swap controller is designed to provide protection, control, and diagnostics for Hot Swap applications. It can detect faults such as overvoltage, undervoltage and overtemperature, and will disable the load to protect the system from any potential damage. It also has adjustable settings for current limit, turn-on and turn-off delay, and dead time. This makes it ideal for low voltage applications.

The specific data is subject to PDF, and the above content is for reference