LTC4241CGN#TRPBF

Series:	--
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Type:	Hot Swap Controller
Number of Channels:	5
Internal Switch(s):	Both
Applications:	PCI, PCI-X
Features:	Latched Fault, Thermal Limit, UVLO
Programmable Features:	Current Limit, Fault Timeout, Slew Rate
Voltage - Supply:	3.3V, 5V, ±12V
Current - Output (Max):	--
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	20-SSOP (0.154", 3.90mm Width)
Supplier Device Package:	20-SSOP
Feature Pins:	AUXON, /FAULT, ON, /PWRGD, TIMER
Base Part Number:	LTC4241

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integration circuits (PMICs) have revolutionized the way power is managed in modern technologies. PMICs are an integral part of any embedded device, and the LTC4241CGN#TRPBF is no exception. This device, which is in the family of PMICs known as Hot Swap Controllers, is used by system designers to provide robust power management solutions in high-current applications.The LTC4241CGN#TRPBF Hot Swap Controller is a device that allows system design engineers to safely connect or disconnect loads to or from a DC power source. The controller is especially well suited for hot-swapping loads in telecom, industrial and automotive applications, where current transients could damage the power supply or system components.The LTC4241CGN#TRPBF consists of two distinct parts. The first part is the Hot Swap Circuit, which consists of two MOSFETs and a bootstrap circuit. The MOSFETs are the load switches, which can handle a maximum load current of up to 5A. The bootstrap circuit provides the boost voltage required to keep the MOSFETs on, even when the supply voltage drops below a certain threshold level.The second part of the circuit is the Error Amplifier, which is used to detect any fault condition that can cause the load to be over-powered. It is also used to monitor the current flowing through the load. The error amplifier is responsible for detecting any over-current or over-voltage conditions and then turning the MOSFETs off or limiting their current. It is also used to monitor the temperature of the device, so that if the temperature exceeds a certain threshold, the MOSFETs will shut off to prevent the device from overheating.In operation, the LTC4241CGN#TRPBF begins by applying a low level logic signal to the INPUT pin. This signal is then monitored by the error amplifier and adjusted as needed to either enable or disable the MOSFETs. If the load current exceeds the set limit, or if the temperature of the device rises above the required range, the error amplifier will cause the MOSFETs to turn off and disconnect the load.The LTC4241CGN#TRPBF is a great solution for system designs that require a robust, hot swapping controller. It provides a reliable, safe way to connect and disconnect loads in a wide range of applications. It also features an adjustable over-voltage and over-current threshold to protect the system components and the power supply. The error amplifier ensures that the device is always operating safely and efficiently and will shut off the MOSFETs if necessary. This makes it an ideal solution for industrial and automotive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description