M3933/16-49S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electrical components used to reduce the power of a signal. This is normally accomplished by placing a resistance in series or parallel with the signal path. The M3933/16-49S is one type of attenuator used in various applications. It is a dual-channel, discrete-element attenuator intended to reduce radio frequency interference (RFI) without affecting the signal input.

The M3933/16-49S is a wideband variable attenuator designed to reduce interference and minimize signal distortion. It is able to vary the attenuation level of the signal between 1 dB and 50 dB, making it suitable for a wide range of applications. It is designed to provide reliable appearance and performance even when operating in high-frequency environments over the frequency range from 500 MHz to 12.4 GHz. It can also be used in systems such as cellular networks, digital television, microwave and radar systems, and wireless communication systems.

The M3933/16-49S attenuator is composed of two independent 50 ohm channels that can be adjusted independently of one another. The channels can have an attenuation range of 20 dB to 50 dB in 1 dB steps. The attenuators are constructed from a N-type connector , center conductor, and outer conductor. The center conductor is connected to the input terminal and the upper side is connected to the output terminal. This combination of elements provides an effective shielding from external signals while allowing for excellent performance in terms of variability, linearity, and accuracy in the signal range from 0.5 to 12.4 GHz.

The M3933/16-49S attenuator is a passive electronic component used in many applications to reduce signal strength or noise levels. It is useful for damping signal reflections in both single and multiple transmission lines, providing a linear response at any frequency and attenuation level. It is also an effective means of improving signal-to-noise ratios, reducing harmonics, and increasing dynamic range. In addition, it can be used as an amplitude limiter to prevent distortion when transmitting sensitive material.

The working principle of M3933/16-49S is based on the fact that the transmission power of an electrical signal decreases as it goes through the attenuator. The attenuator works by absorbing some of the energy from the signal, thus reducing its power. The amount of energy absorbed and the amount of attenuation achieved depend on the resistance of the attenuator and the frequency of the signal. The M3933/16-49S has two independent channels, each of which has a variable resistance that can be adjusted. As the resistance is increased, more energy is absorbed and the power of the signal is reduced. Thus, the amount of attenuation can be controlled by adjusting the resistance of the attenuator.

The M3933/16-49S attenuator is used in a variety of applications and has proven to be a reliable and versatile device for reducing RFI. It is an ideal choice for applications such as cell phone towers, broadband networks, and wireless communications systems, as it can provide a reliable level of attenuation while maintaining signal integrity. In addition, it is suitable for use in systems requiring increased linearity, such as radar and digital television systems.

The specific data is subject to PDF, and the above content is for reference