M3933/25-60S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are generally composed of two parts: a pot core and a pot arm. The pot core is installed in the center of the pot arm and is usually connected to an adjustable electrical element, such as a rheostat. The pot arm is usually connected to two output terminals on one side and two input terminals on the other. The output terminals are connected to one or more load resistances, while the input terminals are connected to a signal voltage source.

The M3933/25-60S is a specific type of attenuator that is designed to provide low frequency signal attenuation in audio and communications applications. The M3933/25-60S operates in a range from 25 to 60 dB attenuation in 1 dB steps. It has a nominal input impedance of 10K ohms and a nominal output impedance of 600 ohms.

The M3933/25-60S attenuator consists of a pot core, a pot arm, and six conductor pins, with the two output pins being electrically connected to the pot core, and the remaining four pins being connected to a noise filter section. The pot core is adjustable using the pot arm and provides the range of attenuation from 25 to 60 dB in 1 dB steps. The noise filter section is a three-pole elliptic filter with a 3 dB cutoff of approximately 400 kHz.

The working principle of the M3933/25-60S is fairly simple. The pot core is connected to the signal source, while the other four terminals are connected to the noise filter section. When the pot arm is adjusted, the level of attenuation is controlled as a result of the voltage drop across the pot core. This serves to reduce the signal level from the signal source by a predetermined amount.

The M3933/25-60S is highly useful for applications such as audio systems, communications equipment, and industrial control. In audio systems, the M3933/25-60S is used to regulate levels between the input signal and the amplifier output, preventing signal overload and distortion. In communication systems, it is used to reduce the strength of received signals before they are sent to a receiver, thus avoiding interference from other sources. Lastly, the M3933/25-60S is also useful in industrial control where it is used to adjust the amount of voltage or current running through a circuit in order to achieve the desired result.

The M3933/25-60S attenuator provides a convenient and reliable way to reduce unwanted noise and adjust signal levels in various audio and communication systems. This type of attenuator is designed to operate in a range from 25 to 60 dB in 1 dB steps and has a nominal input impedance of 10K ohms and a nominal output impedance of 600 ohms. The operation of the M3933/25-60S is based on the voltage drop across the pot core, which is adjustable using the pot arm. With its excellent performance and wide range of applications, the M3933/25-60S attenuator is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference