M3933/25-72S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are necessary components in a wide variety of applications. They act as a resistive element in electrical signal paths in order to reduce the amplitude of a signal. Attenuators come in a variety of shapes and sizes, but one of the most popular attenuator designs is the M3933/25-72S. This attenuator is a single-ended, PCB mounted, resistive power divider.

The M3933/25-72S is designed to operate over a wide frequency range from 0.1 GHz to 4 GHz. It is designed to provide a maximum attenuation of 25 dB, with insertion loss of 0.2 dB. It is designed to provide very accurate attenuation with high repeatability and return loss of greater than 18 dB. The power handling is 0.5 W.

The M3933/25-72S is widely used in a variety of applications. One of the most common uses is in antenna test systems. By inserting an attenuator in the signal path, the antenna gain can be accurately calibrated and tested. This attenuator is also used in cellular base stations and telecommunications systems to provide equalization of power levels between transmitters and receivers. It is also used in cellular towers to provide impedance matching and signal conditioning.

Another use of the M3933/25-72S is in radar systems. It is used to provide a match between the radar antenna and the receiver circuitry. Attenuators can also be used in radar receivers to control the gain of the receiver and reduce interference.

The working principle of the M3933/25-72S is fairly simple. It consists of a series of resistor components that form a low-loss power divider. The resistors are arranged in a zigzag pattern that results in an equal division of power applied at the input. The attenuation is determined by the relative resistance of the resistors.

The M3933/25-72S is a popular attenuator design that is used in a variety of applications. It is designed to provide accurate attenuation with high repeatability and low insertion loss over a wide frequency range. It is a widely used component in antenna testing, telecommunications, and radar systems. Its simple design and reliable performance make it a top choice for many applications.

The specific data is subject to PDF, and the above content is for reference