M93C46-WMN6TP Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is an electronic component responsible for storing data. It is used in computers to store programs and files. Memory can be categorized into two types: Volatile and Non-volatile. Volatile memory is temporary and will lose data when the power is turned off, whereas non-volatile memory is stored even when the power is turned off. M93C46-WMN6TP is a non-volatile memory from STMicroelectronics. This memory is a serial access memory with an 8-bit data bus. It has three pins, Vcc, GND and DATA, and it operates at 3.3V. It has a maximum operating temperature of 125°C.

The M93C46-WMN6TP is typically used in automotive, automotive sensor information storage, security, data logging, and industrial applications. For example, it can be found in onboard diagnostic (OBD) systems, automotive tire pressure monitoring systems (TPMS), car access systems, smart cards, PC power supplies, and other devices. It has a number of advantages such as its small footprint, low voltage operation, and low power consumption. Its non-volatile memory also means it stores data even when the power is turned off.

The working principle of M93C46-WMN6TP is based on the EEPROM (Electrically Erasable Programmable Read-Only Memory) technology. This technology enables the device to erase and write data with the help of electrical signals. The M93C46-WMN6TP has a divider-based organization. This means it can store up to 32 bytes of data in separate memory segments of 2, 4, 8 and 16 bytes. Data is written and read serially, and the device supports stop, start and ack commands. The device also has a write protect mode which allows users to lock the memory and prevent accidental writes.

The M93C46-WMN6TP uses an internal charge pump capacitor to provide the erase and write power. This is charged once the Vcc voltage reaches the predefined threshold. Once it reaches the threshold voltage, the device will erase or write the data into the memory. This process is normally called an “erase and write cycle”. The device uses the charge pump capacitor to erase and write data, and then the device is reset to its initial state. After a successful read or write operation the device will generate a “data ready” flag to indicate the successful completion of the operation.

In conclusion, M93C46-WMN6TP is a non-volatile memory device that uses EEPROM technology to store and retrieve data. It is used in automotive, automotive sensor information storage, security, data logging, and industrial applications. It has a divider-based organization, which enables it to store up to 32 bytes of data. The device uses an internal charge pump capacitor to provide the erase and write power, and it also has a write protect mode to lock the memory and prevent accidental writes.

The specific data is subject to PDF, and the above content is for reference