MALIEYN07CB512H02K

Aluminum electrolytic capacitors, also known as aluminum electrolytic capacitors, aluminum electrolytic capacitors, and electrolytic capacitors, are widely used in electronic circuits. They are polarized components and usually consist of an anode metal foil and a cathode aluminum oxide layer acting as the dielectric. The anode is made of aluminum foil, and is usually etched to increase its effective plate area and reduce equivalent series resistance. It is then rolled to form a cylindrical shape, rolled with an electrolyte soaked paper or impregnated with an electrolyte, and hermetically sealed with a metal cover. MALIEYN07CB512H02K is an aluminum electrolytic capacitor, which is widely used in electronic circuits. The various components of this capacitor are described in detail below.

Anode Metal Foil: The anode is made of the metal foil and is etched to increase its effective plate area and reduce equivalent series resistance. The anode creates the charge balance in the capacitor and is responsible for a reliable dielectric layer. The anode material of this capacitor is Aluminum.

Cathode Aluminum Oxide Layer: The Cathode is made of Aluminum oxide and acts as the dielectric. It is formed when aluminum foil is heated and oxidized, forming a very thin but electrically insulating aluminum oxide layer. The cathode oxide layer of this capacitor is made from Aluminum oxide.

Electrolytic Paper: The electrolytic paper is soaked with an electrolyte, which increases the capacitance of the capacitor. The paper is then rolled into a cylindrical shape and hermetically sealed with a metal cover. The electrolyte paper of this capacitor is made of the paper.

Capacitance: The capacitance of a capacitor is dependent on its physical size and the area of theplates. For a given voltage rating, capacitance is directly proportional to its physical size. The capacitance of this capacitor is 0.51uF.

Application Field: The MALIEYN07CB512H02K aluminum electrolytic capacitor is widely used in electronic circuits. It is typically used as a bypass capacitor for power supply and signal lines in audio and video circuits. It is also used in motor-run applications to reduce power fluctuation. Additionally, it can also be used to filter out high frequency noise generated by switching circuits.

Working principle: An aluminum electrolytic capacitor works by allowing an electric current to flow through an electrolytic liquid between two electrodes (anode and cathode). The cathode is a thin layer of aluminum oxide, while the anode is metal foil. As current flows through the electrolyte, it causes the anode to become positively charged, and the oxide layer on the cathode to become negatively charged. An electric field is created between the plates, and it is this field that stores the charge within the capacitor.