MAX1146BCUP+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADCs) are increasingly becoming the go-to solution for converting analog signals into digital form. The MAX1146BCUP+T is one such device that is designed to provide a fast, flat-response, low-noise, simultaneous A/D conversion of differential or single-ended input signals. It is a high performance, low cost analog-to-digital converter for use in a wide range of applications including medical, industrial, and consumer electronics.

The MAX1146BCUP+T combines a low-cost Digital Signal Processor (DSP) and analog-to-digital (A/D) converter, into a single device. It includes a 10-bit converter with a maximum conversion rate of 500 Msps (mega samples per second). This converter offers a wide input dynamic range of 0.5 to 5.5 volts, a low noise level of 4.5µVrms and a low offset of 0.2mV. Additionally, the device provides a configurable range between 10 Vpk and 2.5 Vpk. To further enhance performance, the MAX1146BCUP+T can also provide window and auto-zeroing options.

The MAX1146BCUP+T is suitable for applications demanding wide resolution and fast conversion rates such as pulse oximetry, patient monitoring, and medical imaging. Other applications that can benefit from the MAX1146BCUP+T\'s capabilities include acoustic measurement systems, automotive infotainment systems, industrial control and communications, and consumer audio systems.

The MAX1146BCUP+T is capable of simultaneously digitizing two single-ended inputs or four differential inputs. The input signal range of the device is configurable and can be set up with a 0.5V to 5.5V single-ended range, or any combination of 9V peak differential input range. The inputs are routed internally to a multiplexer and then to the A/D converter. An external clock and data rate may be used to control the device, or it can be left in free-running mode.

The main working principle behind the MAX1146BCUP+T converter is Pulse Width Modulation (PWM). Each sample is converted into a digital value through a sequence of pulses with varying width. The Pulse Width Modulated (PWM) values are then used to reconstruct the original signal with minimal distortion and maximum resolution. The A/D converter also features a built-in oversampling technique that improves the signal-to-noise ratio (SNR). The built-in digital filter allows for a small amount of aliasing when used with digital input signals.

The MAX1146BCUP+T requires only a single-voltage power supply and supports one input buffer for each channel. It can also support an external reference input, allowing the user to adjust the full-scale range from ±10V to ±2.5V. The digital outputs of the MAX1146BCUP+T are available in a 3-wire serial interface, which includes bit-direction (DIR) and clock (CLK) pins. The device has a power-down feature that allows it to remain in a stand-by mode until it is ready to convert.

The MAX1146BCUP+T provides an integrated power-down feature, which enables the system\'s power utilization to reduce even when the device is not converting. The device also has an integrated temperature sensor, which provides temperature information to the host system. This can be used to ensure accuracy and integrity of the signal conversion. The MAX1146BCUP+T is available in a 3x3mm, 62-lead LFCSP package, which makes it an ideal solution for space-constrained applications.

The MAX1146BCUP+T is a high-performance A/D converter that offers a wide dynamic range and fast conversion rate. Its combination of features make it suitable for a range of applications including medical, industrial, and consumer applications. It requires only a single voltage supply and is available in a 3x3mm, 62-lead LFCSP package, making it an ideal solution for space-constrained applications.

The specific data is subject to PDF, and the above content is for reference